Boot Startup

Common Problems 115542

MariaDB fails to start after crash

🟡 Medium   ⏱ 5–30 min  Last verified: 28 February 2021 📖 ~1 min read Table of contents Symptom & Impact Environment & Reproduction Root Cause Analysis Quick Triage Step-by-Step Diagnosis Solution – Primary Fix Solution – Alternative Approaches Verification & Acceptance Criteria Rollback Plan Prevention & Hardening Related Errors & Cross-Refs References & Further […]

Read more
How to Configure Traffic Shaping with tc on Oracle Linux 8 — step-by-step Oracle Linux 8 tutorial on Progressive Robot

How to Configure Traffic Shaping with tc on Oracle Linux 8

Introduction This tutorial demonstrates how to Configure Traffic Shaping with tc on Oracle Linux 8 on Oracle Linux 8. It is written for administrators who want a repeatable, well-explained walkthrough that goes beyond a bare command list and explains each configuration choice. Every command is tested against a freshly registered Oracle Linux 8 system with […]

Read more
How to Use Capsicum Sandboxing on FreeBSD 12 — step-by-step FreeBSD 12 tutorial on Progressive Robot

How to Use Capsicum Sandboxing on FreeBSD 12

Introduction FreeBSD 12 is a UNIX-derived operating system renowned for its network stack performance, ZFS integration, and Jail isolation primitives. Setting up use capsicum sandboxing on freebsd 12 on FreeBSD 12 follows the rc.conf/service(8) paradigm rather than systemd, which means enabling a service and configuring its startup options are done differently from any Linux distribution. […]

Read more
How to Set Up Buildkite Agent on Oracle Linux 8 — step-by-step Oracle Linux 8 tutorial on Progressive Robot

How to Set Up Buildkite Agent on Oracle Linux 8

Introduction Setting up set up buildkite agent on oracle linux 8 on a Oracle Linux 8 server is a common task for system administrators, DevOps engineers, and site reliability engineers. This guide explains how to Set Up Buildkite Agent on Oracle Linux 8, with all the commands you need, the SELinux and firewalld considerations to […]

Read more
How to Configure ArgoCD on Oracle Linux 8 — step-by-step Oracle Linux 8 tutorial on Progressive Robot

How to Configure ArgoCD on Oracle Linux 8

Introduction Setting up configure argocd on oracle linux 8 on a Oracle Linux 8 server is a common task for system administrators, DevOps engineers, and site reliability engineers. This guide explains how to Configure ArgoCD on Oracle Linux 8, with all the commands you need, the SELinux and firewalld considerations to keep in mind, and […]

Read more
How to Configure GNU Make on IBM AIX 7.1 — step-by-step IBM AIX 7.1 tutorial on Progressive Robot

How to Configure GNU Make on IBM AIX 7.1

Introduction IBM AIX 7.1 is the latest release of IBM’s enterprise-grade UNIX operating system, running on IBM Power Systems hardware. Known for its reliability, security, and performance in mission-critical environments, AIX 7.1 introduces enhanced virtualization, security hardening, and cloud integration features. This guide covers how to configure gnu make on ibm aix 7.1 on IBM […]

Read more
How to Use AIX Backup and Restore (tar, cpio) on IBM AIX 7.2 — step-by-step IBM AIX 7.2 tutorial on Progressive Robot

How to Use AIX Backup and Restore (tar, cpio) on IBM AIX 7.2

Introduction IBM AIX 7.2 is the latest release of IBM’s enterprise-grade UNIX operating system, running on IBM Power Systems hardware. Known for its reliability, security, and performance in mission-critical environments, AIX 7.2 introduces enhanced virtualization, security hardening, and cloud integration features. This guide covers how to use aix backup and restore (tar, cpio) on ibm […]

Read more
How to Install PostgreSQL on Oracle Linux 8 — step-by-step Oracle Linux 8 tutorial on Progressive Robot

How to Install PostgreSQL on Oracle Linux 8

Introduction This tutorial demonstrates how to Install PostgreSQL on Oracle Linux 8 on Oracle Linux 8. It is written for administrators who want a repeatable, well-explained walkthrough that goes beyond a bare command list and explains each configuration choice. Every command is tested against a freshly registered Oracle Linux 8 system with the default AppStream […]

Read more
How to Configure Always On VPN with Windows Server 2012 R2 — step-by-step Windows Server 2012 R2 tutorial on Progressive Robot

How to Configure Always On VPN with Windows Server 2012 R2

How to Configure Always On VPN with Windows Server 2012 R2 Always On VPN is a remote access solution that provides seamless, persistent VPN connectivity for domain-joined Windows clients. Unlike traditional VPN solutions that require users to manually initiate connections, Always On VPN automatically establishes and maintains VPN tunnels without user intervention. On Windows Server […]

Read more
Common Problems 119147

Ubuntu 14.04 LTS – swap partition not activating at boot

🟡 Medium   ⏱ 5–30 min  Last verified: 24 February 2021 Affected versions: Ubuntu 14.04 LTS Ubuntu 14.04 Ubuntu 14.04.6 📖 ~1 min read Table of contents Symptom & Impact Environment & Reproduction Root Cause Analysis Quick Triage Step-by-Step Diagnosis Solution – Primary Fix Solution – Alternative Approaches Verification & Acceptance Criteria Rollback Plan Prevention […]

Read more
CHAT