Introduction

Setting up install gitlab runner on a RHEL 10 server is a common task for system administrators, DevOps engineers, and site reliability engineers. This guide explains how to Install GitLab Runner on RHEL 10, with all the commands you need, the SELinux and firewalld considerations to keep in mind, and how to validate the result on the live system.

Prerequisites

Before you begin, ensure you have a freshly installed RHEL 10 system with root or sudo privileges. The system should be registered with Red Hat Subscription Manager (or attached to a Satellite/Capsule instance) so that the AppStream and BaseOS repositories are available. A minimum of 2 vCPU, 4 GB RAM, and 20 GB of disk space is recommended for most workloads. Network access to the public internet (or a local mirror) is required to pull packages and dependencies.

Step 1: Update RHEL 10 and Enable Repositories

Ensure your RHEL 10 system is fully patched before installing new software. The AppStream repository is enabled by default on registered systems and provides the modular packages needed for most modern workloads. On RHEL 10 this step benefits from the modular AppStream design, which lets you pin to a specific stream and avoid surprise major-version upgrades during routine patching.

sudo dnf upgrade -y
sudo dnf repolist enabled

Step 2: Install Required Packages

Install the gitlab-runner package along with any supporting dependencies from the standard RHEL 10 repositories. dnf will automatically resolve and pull in libraries, language runtimes, and configuration files. Take a moment to read the upstream documentation linked from the package manpage; Red Hat does not always carry every upstream option, and reading the official notes prevents you from copy-pasting flags that silently get ignored.

sudo dnf install -y gitlab-runner

Step 3: Apply the Initial Configuration

Now configure the component for your environment. Always keep a backup copy of the original configuration file so you can roll back quickly if something goes wrong, and prefer editing files in /etc/ over modifying the package defaults inside /usr/share/. Pay attention to file ownership and permissions here — a service that is misconfigured at the file-system level will fail in subtle, hard-to-diagnose ways even though dnf reports a clean install.

sudo cp /etc/gitlab-runner/gitlab-runner.conf /etc/gitlab-runner/gitlab-runner.conf.bak
sudo nano /etc/gitlab-runner/gitlab-runner.conf  # edit settings as required

Step 4: Enable and Start the gitlab-runner Service

systemd is responsible for service lifecycle on RHEL 10. The enable --now flag both starts the service immediately and configures it to launch automatically at every boot, which is the behavior you almost always want for a server-side component. On RHEL 10 this step benefits from the modular AppStream design, which lets you pin to a specific stream and avoid surprise major-version upgrades during routine patching.

sudo systemctl enable --now gitlab-runner
sudo systemctl status gitlab-runner --no-pager

Step 6: SELinux Considerations

SELinux runs in enforcing mode by default on RHEL 10. If your service needs to write outside its default directories, bind to non-standard ports, or connect outbound to other services, you will need to set the appropriate boolean or label the files. The commands below are a typical starting point. Take a moment to read the upstream documentation linked from the package manpage; Red Hat does not always carry every upstream option, and reading the official notes prevents you from copy-pasting flags that silently get ignored.

sudo semanage port -a -t http_port_t -p tcp 8080
# only if you change the listening port
sudo ausearch -m AVC -ts recent

Step 7: Inspect Service Logs

All systemd-managed services on RHEL 10 stream their output to the journal, which is searchable, indexed, and persists across reboots once you create /var/log/journal. Use journalctl to follow logs in real time and to investigate startup failures. Logging at this stage is critical — anything you do here that is not logged will be very difficult to audit six months from now, so prefer commands that leave a trail in /var/log or the systemd journal.

sudo journalctl -u gitlab-runner -e --no-pager
sudo journalctl -u gitlab-runner -f

Troubleshooting Common Issues

If the service refuses to start, the first place to look is the systemd journal — every service on RHEL 10 logs there by default. Filter to the last boot to avoid wading through historical entries. The second most common class of problem on a fresh install is SELinux denials, especially when a service tries to read from or write to a directory that is not labelled with its expected type. Use ausearch -m AVC -ts recent to look for denials, and either set the correct file context with semanage fcontext + restorecon or flip the relevant boolean. Finally, if the service starts but is unreachable, double-check firewalld with firewall-cmd --list-all and confirm the runtime configuration matches the permanent one.

sudo journalctl -b --priority=err
sudo ausearch -m AVC -ts recent
sudo firewall-cmd --list-all

Best Practices and Hardening

For any production deployment on RHEL 10 you should track configuration in a version control system, apply security errata regularly with dnf-automatic, and centralise log collection so that a compromised host cannot quietly erase its own audit trail. Run periodic OpenSCAP compliance scans against the CIS or DISA STIG profile to catch drift. If the service exposes a network port, place it behind a reverse proxy or VPN where possible and rotate any credentials it uses on a schedule. Snapshot the system (using Stratis, LVM, or your hypervisor) before every major change so you have a fast rollback path.

sudo dnf install -y dnf-automatic
sudo systemctl enable --now dnf-automatic.timer
sudo oscap xccdf eval --profile xccdf_org.ssgproject.content_profile_cis /usr/share/xml/scap/ssg/content/ssg-rhel10-ds.xml

Verification

After completing every step, run a quick set of checks to confirm the deployment is healthy on RHEL 10. Examine the systemd unit state to make sure no units have failed, look for any SELinux denials in the audit log, inspect the listening sockets to confirm the service is bound to the expected interface and port, and finally make a real client request to validate end-to-end functionality. If any of those four checks fail, return to the troubleshooting section before treating the deployment as complete.

sudo systemctl --failed
sudo ausearch -m AVC -ts recent || true
sudo ss -tulpn
sudo journalctl --since "10 minutes ago" --priority=warning

Conclusion

You have successfully completed how to Install GitLab Runner on RHEL 10 on RHEL 10. The configuration is now persistent across reboots thanks to systemd, protected by SELinux in enforcing mode, and reachable through the firewalld rules you added. From here you can integrate the service with your monitoring stack, harden it further with auditd rules, and roll it out across a fleet using Ansible playbooks.

Looking forward, consider encoding the steps above as an Ansible role so the procedure becomes reproducible across your entire fleet, and add a Prometheus scrape config (or a Zabbix template) so the service is monitored from the moment it starts. Pair the deployment with a backup strategy — restic, borgbackup, or rsnapshot all work well on RHEL 10 — so that recovery from data loss is a matter of minutes rather than hours.