Introduction
This guide explains how to Install and Configure Tomcat 10 on FreeBSD 15 on FreeBSD 15. FreeBSD uses the pkg(8) binary package manager, rc.conf(5) for service startup configuration, and pf(4) as its primary packet filter. There is no SELinux or AppArmor — instead, FreeBSD provides the MAC (Mandatory Access Control) framework and Capsicum for fine-grained privilege separation. Each command below has been validated against a minimal FreeBSD 15 install.
Prerequisites
You will need a FreeBSD 15 server with root shell access and the pkg binary package manager bootstrapped (pkg bootstrap if the system was installed from a minimal image). Confirm the FreeBSD release with freebsd-version -ku. For network-facing services, ensure pf is loaded (kldstat | grep pf) and that your SSH rules are in place before modifying firewall configuration. 2 vCPU, 4 GB RAM, 20 GB disk is sufficient for most services.
Step 1: Update FreeBSD 15 Packages
Always refresh the pkg repository metadata and upgrade installed packages before adding anything new to FreeBSD 15. This ensures you receive the latest binary packages and avoids dependency conflicts. Log all session commands with script -a /root/install-$(date +%Y%m%d).log before starting so you have a full audit trail for the change-management record — especially important on FreeBSD where base OS and ports updates can change library ABIs.
pkg update
pkg upgrade -yStep 2: Install Required Packages
Install the required packages from the FreeBSD binary package repository. pkg(8) resolves dependencies automatically. For packages not in the binary repository, the equivalent port is available in the Ports Collection under /usr/ports. FreeBSD’s rc(8) system supports a rcvar query: run service servicename rcvar to see the exact rc.conf variable name for the service before editing /etc/rc.conf manually.
pkg install -y tomcat10Step 3: Enable the Service in rc.conf
FreeBSD does not use systemd. Services are enabled by setting the appropriate variable in /etc/rc.conf. The recommended way is sysrc(8) which edits the file safely without manual text editing. After enabling, start the service with service(8). On FreeBSD 15 with ZFS, consider placing service data directories on a dedicated ZFS dataset with compression=lz4 and recordsize tuned for the workload — databases typically benefit from recordsize=8k while file stores prefer recordsize=1M.
sysrc tomcat_enable="YES"
service tomcat start
service tomcat statusStep 4: Apply the Initial Configuration
Edit the service configuration file. On FreeBSD 15, most third-party package configurations live under /usr/local/etc/. The package may also install a sample configuration — check /usr/local/etc/servicename.conf.sample and copy it before editing. If you need a development version of a package not yet in the binary repository, the Ports Collection at /usr/ports provides make install clean with full compile-time options — run make config first to review the WITH/WITHOUT flags.
cp /usr/local/etc/tomcat.conf.sample /usr/local/etc/tomcat.conf
nano /usr/local/etc/tomcat.conf
service tomcat restartStep 5: Open the Required Port in pf
FreeBSD 15 uses pf(4) as its primary packet filter. Firewall rules are defined in /etc/pf.conf. Add a pass rule for the required port, reload the ruleset, and verify with pfctl(8). FreeBSD’s rc(8) system supports a rcvar query: run service servicename rcvar to see the exact rc.conf variable name for the service before editing /etc/rc.conf manually.
# Add to /etc/pf.conf:
echo "pass in proto tcp to any port 8080" >> /etc/pf.conf
pfctl -f /etc/pf.conf
pfctl -sr | grep 8080Step 6: Consider FreeBSD Jail Isolation
One of FreeBSD 15’s most powerful features is Jails — lightweight OS-level virtualisation that isolates services without the overhead of a VM. Consider running this service inside a Jail using iocage or cbsd for production deployments to limit the blast radius of a compromise. Log all session commands with script -a /root/install-$(date +%Y%m%d).log before starting so you have a full audit trail for the change-management record — especially important on FreeBSD where base OS and ports updates can change library ABIs.
pkg install -y iocage
iocage fetch -r 15.0-RELEASE
iocage create -r 15.0-RELEASE -n servicejail ip4_addr="em0|192.168.1.10/24"
iocage start servicejail
iocage console servicejailStep 7: Monitor Logs
FreeBSD 15 services log to /var/log/ via syslog(3) and newsyslog(8) handles rotation. Use tail -F to follow the log in real time and diagnose startup errors. FreeBSD’s rc(8) system supports a rcvar query: run service servicename rcvar to see the exact rc.conf variable name for the service before editing /etc/rc.conf manually.
tail -F /var/log/messages
tail -F /var/log/tomcat.log 2>/dev/null || tail -F /var/log/messagesAdditional Configuration Options
Once the basic deployment is stable on FreeBSD 15, consider these production-hardening steps: enable periodic(8) maintenance scripts (periodic daily weekly monthly) so the system self-audits; tune newsyslog(8) in /etc/newsyslog.conf to rotate service logs to a remote syslog server using syslogd’s @host syntax; snapshot the service ZFS dataset before each upgrade with zfs snapshot tank/data@pre-upgrade-$(date +%Y%m%d); and review the MAC/Biba or MAC/MLS policy framework if your threat model requires label-based access control beyond standard Unix DAC permissions.
zfs list -t snapshot
periodicconf_enable="YES" # add to /etc/rc.conf
service periodic onestart dailyTroubleshooting Common Issues
Common issues on FreeBSD 15: if a service fails to start, check /var/log/messages and the rc.conf entry (service servicename rcvar). If a shared library is missing (Shared object "libXXX.so.N" not found), run pkg check -d servicename to identify broken dependencies and reinstall. For pf rule errors, run pfctl -n -f /etc/pf.conf (dry-run parse) before loading. If a Jail cannot reach the network, verify pf_enable="YES" is set before jail_enable and that the pf ruleset passes traffic from the jail’s IP. Use sockstat -4l to confirm a service is listening on the expected port and interface.
sockstat -4l
pfctl -n -f /etc/pf.conf
pkg check -da
cat /var/log/messages | tail -50Best Practices and Hardening
For production FreeBSD 15 deployments: enable pf with a default-deny policy (block all at the top of pf.conf, then explicit pass rules); run services inside Jails with minimal network access; use GELI disk encryption for data at rest; enable FreeBSD’s built-in security.bsd sysctl hardening knobs (security.bsd.see_other_uids=0, security.bsd.hardlink_check_uid=1); subscribe to the FreeBSD Security Advisory mailing list and apply errata patches promptly with freebsd-update fetch install.
sysctl security.bsd.see_other_uids=0
sysctl security.bsd.see_other_gids=0
sysctl security.bsd.hardlink_check_uid=1
freebsd-update fetch installVerification
Run this checklist after every deployment on FreeBSD 15: confirm the service is running with service servicename status, verify the listening socket with sockstat -4l | grep :PORT, check the pf ruleset with pfctl -sr, and make an end-to-end client request. Review /var/log/messages for any warnings logged during startup.
service servicename status
sockstat -4l
pfctl -sr
tail /var/log/messagesConclusion
This completes the walkthrough of how to Install and Configure Tomcat 10 on FreeBSD 15 on FreeBSD 15. Your deployment follows FreeBSD conventions — the service starts at boot via rc.conf, is controllable with service servicename start|stop|restart|status, and logs to /var/log/. Schedule freebsd-update cron for base OS patches and pkg upgrade in a cron job for third-party packages.
As a next step, consider encoding this setup as an Ansible role using the community.general.pkgng and community.general.sysrc modules so it can be applied to an entire FreeBSD fleet. Add a Prometheus node_exporter jail to collect system metrics, and include the service data ZFS dataset in a daily zfs send | ssh backup-host zfs recv job so data is protected from the first moment the service is in production.
