FreeBSD 13 — prosody — multiple vulnerabilities (14 CVEs) — patch and remediation guide

📖 ~4 min read  •  Source: FreeBSD VuXML

VuXML topic: Prosody XMPP server advisory 2026-04-29

Related CVEs: CVE-2016-0756 CVE-2016-1231 CVE-2016-1232 CVE-2021-32917 CVE-2021-32918 CVE-2021-32919 CVE-2021-32920 CVE-2021-32921  +6 more

Upstream summary: The Prosody team reports: Traffic patterns were discovered which can cause Prosody to consume excessive amounts of memory with much smaller amounts of incoming traffic. This traffic can be sent by unauthenticated connections. It was discovered that mod_proxy65’s access control was broken and incomplete due to two bugs. The issue with unpausing connections was discovered and disclosed by Max Hearnden .

Table of contents

1. Symptom & Impact
2. Environment & Reproduction
3. Root Cause Analysis
4. Quick Triage
5. Step-by-Step Diagnosis
6. Solution – Primary Fix
7. Solution – Alternative Approaches
8. Verification & Acceptance Criteria
9. Rollback Plan
10. Prevention & Hardening
11. Related Errors & Cross-Refs
12. References & Further Reading

Symptom & Impact

On FreeBSD 13 hosts that have prosody installed, operators see behaviour consistent with the FreeBSD VuXML entry: pkg audit flags the installed version; any daemon, CLI tool, or application linked against prosody may misbehave or fail to start after upgrade; and — for security-rated advisories — the host is exposed to the vulnerabilities above. Impact ranges from a single restart cycle to full availability incidents on jails, bhyve guests, or downstream consumers that depend on prosody.

Environment & Reproduction

Reproduction targets FreeBSD 13. Confirm release, installed package, and capture baseline state:

freebsd-version -kru
uname -a
pkg info prosody
pkg query "%n-%v" prosody
pkg audit -F
service -e

Trigger the workflow that exposes prosody — multiple vulnerabilities (14 CVEs) — patch and remediation guide while collecting:

tail -200 /var/log/messages
dmesg -a | tail -200
tail -200 /var/log/pkg.log

Root Cause Analysis

Root cause is tracked at FreeBSD VuXML. The FreeBSD ports security team shipped a corrective prosody port revision; hosts on an outdated build remain exposed. Correlate package logs with system logs and kernel state to isolate the change that triggered the failure mode:

tail -500 /var/log/pkg.log
tail -500 /var/log/messages
sysctl kern.lastpid
sysctl kern.osreldate     # numeric __FreeBSD_version, e.g. 1400097

Quick Triage

Run these checks on FreeBSD 13 to confirm the failure mode and current state of prosody:

pkg version -v prosody                # installed vs available version
pkg audit prosody                     # advisory match for this package
tail -100 /var/log/messages
dmesg -a | tail -100
kldstat                              # kernel module state (for kernel/driver pkgs)
pfctl -sr 2>/dev/null || ipfw list   # only if pf/ipfw is enabled
# If prosody ships an rc.d service (script name may differ from the pkg name,
# e.g. bind918→named, php83→php-fpm), check it:
service -e | grep -i prosody && service <rc-script-name> status

Step-by-Step Diagnosis

1. List enabled services (only relevant if the package provides one).

   service -e

2. Follow live logs.

   tail -F /var/log/messages
   dmesg

3. Validate firewall rules (skip if neither pf nor ipfw is enabled).

   pfctl -sr -v 2>/dev/null || ipfw show

4. Check package integrity for prosody.

   pkg check -B prosody
   pkg check -d prosody    # verify shared-library deps

5. Reinstall prosody if integrity check fails.

   pkg install -fy prosody

6. Correlate findings with /var/log/pkg.log and FreeBSD VuXML to pin the commit that introduced prosody — multiple vulnerabilities (14 CVEs) — patch and remediation guide.

Solution – Primary Fix

Install the corrective prosody port revision referenced by FreeBSD VuXML:

sudo pkg update
sudo pkg upgrade prosody              # or: sudo pkg upgrade -y for the whole system
# If prosody provides an rc.d service, restart it (script name may differ from pkg name):
# sudo service <rc-script-name> restart
pkg audit prosody                    # confirm no remaining advisory for this package

For ports-tree builders (FreeBSD 13.x and earlier used portsnap; on FreeBSD 14+ the ports tree is fetched with Git):

# FreeBSD 14+ (portsnap was removed):
sudo pkg install -y git-lite
sudo git clone --depth 1 https://git.FreeBSD.org/ports.git /usr/ports
# FreeBSD 13.x and earlier:
# sudo portsnap fetch update
cd /usr/ports/<category>/prosody
sudo make deinstall reinstall clean

Reboot only if the package ships a kernel module or replaces a shared library used by long-running daemons.

Solution – Alternative Approaches

If the primary fix is not viable, choose from these alternatives:

• Lock the package until the fix is vetted:

  sudo pkg lock prosody

• Downgrade to a known-good revision. pkg install pkgname-VERSION is not a real downgrade syntax — fetch a specific build instead:

  # 1. Discover available versions across configured repos:
  pkg search -e prosody
  pkg rquery -r FreeBSD-quarterly '%n-%v' prosody
  # 2. Install from a specific saved .pkg file:
  sudo pkg add -f /path/to/prosody-<older-version>.pkg
  # 3. Or switch the host repo to the quarterly branch (see snippet below) and:
  sudo pkg upgrade -fr FreeBSD-quarterly prosody

• Switch the pkg repository between quarterly and latest by editing /usr/local/etc/pkg/repos/FreeBSD.conf:

  FreeBSD: {
    url: "pkg+https://pkg.FreeBSD.org/${ABI}/quarterly",
    mirror_type: "srv",
    signature_type: "fingerprints",
    fingerprints: "/usr/share/keys/pkg",
    enabled: yes
  }

• Isolate the affected service in a jail with stricter firewall rules:

  iocage create -n prosody-jail -r 13.4-RELEASE
  iocage set allow_raw_sockets=0 prosody-jail
  # or with Bastille:
  bastille create prosody-jail 13.4-RELEASE 10.0.0.10

• Replace the service with a vendored static build for the period between exposure detection and full rollout.

Verification & Acceptance Criteria

All of these should pass after the fix:

pkg info prosody                # shows the expected fixed version
pkg audit prosody               # no advisory for this package (exit code 0)
tail -50 /var/log/messages   # no new errors after upgrade
# If prosody ships a service, confirm it is running under its rc.d name:
# service <rc-script-name> status

The original reproduction for prosody — multiple vulnerabilities (14 CVEs) — patch and remediation guide must not trigger across two consecutive runs.

Rollback Plan

Capture state before any change (only ZFS root has boot environments — UFS hosts skip bectl):

pkg query "%n-%v" > /root/pkg-pre.txt
# ZFS-on-root only:
sudo bectl create pre-prosody-patch

To revert if the upgrade is bad, reinstall the previously saved .pkg file:

sudo pkg add -f /var/cache/pkg/prosody-<previous-version>.pkg
# Or activate the pre-patch boot environment and reboot (ZFS-on-root only):
sudo bectl activate pre-prosody-patch
sudo shutdown -r now

For kernel/loader changes on a UFS host, boot the previous kernel from the loader prompt (press 3 at the menu, then boot kernel.old).

Prevention & Hardening

Prevent recurrence on FreeBSD 13 hosts running prosody:

• Enable the daily security pkg audit in /etc/periodic.conf:

  daily_status_security_pkgaudit_enable="YES"

• Subscribe to freebsd-security-notifications at lists.freebsd.org.

• Mirror through a local pkg repository managed by poudriere:

  poudriere jail -c -j 13amd64 -v 13.4-RELEASE
  poudriere ports -c -p default
  poudriere bulk -j 13amd64 -p default <category>/prosody

• Version-pin sensitive packages:

  sudo pkg lock prosody

• Take an automatic ZFS boot-environment snapshot before every upgrade (ZFS root only):

  sudo bectl create pre-upgrade-$(date +%Y%m%d)

• Monitor file integrity (create a baseline, verify against it later):

  # Create a baseline (use -c; target /usr/local/etc, /etc, /boot — NOT /):
  sudo mtree -c -K sha256digest -p /usr/local/etc > /var/db/usr-local-etc.mtree
  sudo mtree -c -K sha256digest -p /etc          > /var/db/etc.mtree
  # Verify later:
  sudo mtree -p /usr/local/etc < /var/db/usr-local-etc.mtree
  # Or with AIDE for a richer ruleset:
  sudo pkg install -y aide && sudo aide --init && sudo aide --check

• Harden jails with allow.* tunables in /etc/jail.conf:

  prosody_jail {
    allow.raw_sockets = 0;
    allow.sysvipc    = 0;
    allow.mount      = 0;
    allow.chflags    = 0;
  }

Related Errors & Cross-Refs

Issues that commonly surface alongside prosody — multiple vulnerabilities (14 CVEs) — patch and remediation guide: pkg lock contention, mismatched ABI after kernel/userland skew, pf rule drift, and stale shared-library references after upgrade. Triage with:

freebsd-version -kru
uname -K
pkg check -d
pfctl -sr

View all freebsd-13 tutorials on the Tutorials Hub →

Browse all common problems & solutions on the Tutorials Hub.

References & Further Reading

Primary reference: FreeBSD VuXML. Useful manual pages on FreeBSD 13:

man pkg
man freebsd-update
man pfctl
man ipfw
man bectl
man periodic.conf

Other resources: the FreeBSD Handbook, the FreeBSD Security Advisories at security.freebsd.org, and the /usr/ports/UPDATING file for port-specific notes implicated in prosody — multiple vulnerabilities (14 CVEs) — patch and remediation guide.