Affected versions: FreeBSD 12

📖 ~4 min read  •  Source: FreeBSD VuXML

VuXML topic: net/krill — DoS vulnerability

Related CVEs: CVE-2023-0158

Upstream summary: MITRE reports: NLnet Labs Krill supports direct access to the RRDP repository content through its built-in web server at the "/rrdp" endpoint. Prior to 0.12.1 a direct query for any existing directory under "/rrdp/", rather than an RRDP file such as "/rrdp/notification.xml" as would be expected, causes Krill to crash. If the built-in "/rrdp" endpoint is exposed directly to the internet, then malicious remote parties can cause the publication server to crash. The repository co

Table of contents
  1. Symptom & Impact
  2. Environment & Reproduction
  3. Root Cause Analysis
  4. Quick Triage
  5. Step-by-Step Diagnosis
  6. Solution – Primary Fix
  7. Solution – Alternative Approaches
  8. Verification & Acceptance Criteria
  9. Rollback Plan
  10. Prevention & Hardening
  11. Related Errors & Cross-Refs
  12. References & Further Reading

Symptom & Impact

On FreeBSD 12 hosts that have krill installed, operators see behaviour consistent with the FreeBSD VuXML entry: pkg audit flags the installed version; any daemon, CLI tool, or application linked against krill may misbehave or fail to start after upgrade; and — for security-rated advisories — the host is exposed to the vulnerabilities above. Impact ranges from a single restart cycle to full availability incidents on jails, bhyve guests, or downstream consumers that depend on krill.

Environment & Reproduction

Reproduction targets FreeBSD 12. Confirm release, installed package, and capture baseline state:

freebsd-version -kru
uname -a
pkg info krill
pkg query "%n-%v" krill
pkg audit -F
service -e

Trigger the workflow that exposes krill — vulnerability — patch and remediation guide while collecting:

tail -200 /var/log/messages
dmesg -a | tail -200
tail -200 /var/log/pkg.log

Root Cause Analysis

Root cause is tracked at FreeBSD VuXML. The FreeBSD ports security team shipped a corrective krill port revision; hosts on an outdated build remain exposed. Correlate package logs with system logs and kernel state to isolate the change that triggered the failure mode:

tail -500 /var/log/pkg.log
tail -500 /var/log/messages
sysctl kern.lastpid
sysctl kern.osreldate     # numeric __FreeBSD_version, e.g. 1400097

Quick Triage

Run these checks on FreeBSD 12 to confirm the failure mode and current state of krill:

pkg version -v krill                # installed vs available version
pkg audit krill                     # advisory match for this package
tail -100 /var/log/messages
dmesg -a | tail -100
kldstat                              # kernel module state (for kernel/driver pkgs)
pfctl -sr 2>/dev/null || ipfw list   # only if pf/ipfw is enabled
# If krill ships an rc.d service (script name may differ from the pkg name,
# e.g. bind918→named, php83→php-fpm), check it:
service -e | grep -i krill && service <rc-script-name> status

Step-by-Step Diagnosis

  1. List enabled services (only relevant if the package provides one).

    service -e
  2. Follow live logs.

    tail -F /var/log/messages
    dmesg
  3. Validate firewall rules (skip if neither pf nor ipfw is enabled).

    pfctl -sr -v 2>/dev/null || ipfw show
  4. Check package integrity for krill.

    pkg check -B krill
    pkg check -d krill    # verify shared-library deps
  5. Reinstall krill if integrity check fails.

    pkg install -fy krill
  6. Correlate findings with /var/log/pkg.log and FreeBSD VuXML to pin the commit that introduced krill — vulnerability — patch and remediation guide.

Solution – Primary Fix

Install the corrective krill port revision referenced by FreeBSD VuXML:

sudo pkg update
sudo pkg upgrade krill              # or: sudo pkg upgrade -y for the whole system
# If krill provides an rc.d service, restart it (script name may differ from pkg name):
# sudo service <rc-script-name> restart
pkg audit krill                    # confirm no remaining advisory for this package

For ports-tree builders (FreeBSD 13.x and earlier used portsnap; on FreeBSD 14+ the ports tree is fetched with Git):

# FreeBSD 14+ (portsnap was removed):
sudo pkg install -y git-lite
sudo git clone --depth 1 https://git.FreeBSD.org/ports.git /usr/ports
# FreeBSD 13.x and earlier:
# sudo portsnap fetch update
cd /usr/ports/<category>/krill
sudo make deinstall reinstall clean

Reboot only if the package ships a kernel module or replaces a shared library used by long-running daemons.

Need help rolling this patch across a FreeBSD fleet? Our IT Solutions & Services team manages FreeBSD jail/bhyve patch windows. Get in touch for a free consultation.

Solution – Alternative Approaches

If the primary fix is not viable, choose from these alternatives:

  • Lock the package until the fix is vetted:

    sudo pkg lock krill
  • Downgrade to a known-good revision. pkg install pkgname-VERSION is not a real downgrade syntax — fetch a specific build instead:

    # 1. Discover available versions across configured repos:
    pkg search -e krill
    pkg rquery -r FreeBSD-quarterly '%n-%v' krill
    # 2. Install from a specific saved .pkg file:
    sudo pkg add -f /path/to/krill-<older-version>.pkg
    # 3. Or switch the host repo to the quarterly branch (see snippet below) and:
    sudo pkg upgrade -fr FreeBSD-quarterly krill
  • Switch the pkg repository between quarterly and latest by editing /usr/local/etc/pkg/repos/FreeBSD.conf:

    FreeBSD: {
      url: "pkg+https://pkg.FreeBSD.org/${ABI}/quarterly",
      mirror_type: "srv",
      signature_type: "fingerprints",
      fingerprints: "/usr/share/keys/pkg",
      enabled: yes
    }
  • Isolate the affected service in a jail with stricter firewall rules:

    iocage create -n krill-jail -r 12.4-RELEASE
    iocage set allow_raw_sockets=0 krill-jail
    # or with Bastille:
    bastille create krill-jail 12.4-RELEASE 10.0.0.10
  • Replace the service with a vendored static build for the period between exposure detection and full rollout.

Verification & Acceptance Criteria

All of these should pass after the fix:

pkg info krill                # shows the expected fixed version
pkg audit krill               # no advisory for this package (exit code 0)
tail -50 /var/log/messages   # no new errors after upgrade
# If krill ships a service, confirm it is running under its rc.d name:
# service <rc-script-name> status

The original reproduction for krill — vulnerability — patch and remediation guide must not trigger across two consecutive runs.

Rollback Plan

Capture state before any change (only ZFS root has boot environments — UFS hosts skip bectl):

pkg query "%n-%v" > /root/pkg-pre.txt
# ZFS-on-root only:
sudo bectl create pre-krill-patch

To revert if the upgrade is bad, reinstall the previously saved .pkg file:

sudo pkg add -f /var/cache/pkg/krill-<previous-version>.pkg
# Or activate the pre-patch boot environment and reboot (ZFS-on-root only):
sudo bectl activate pre-krill-patch
sudo shutdown -r now

For kernel/loader changes on a UFS host, boot the previous kernel from the loader prompt (press 3 at the menu, then boot kernel.old).

Prevention & Hardening

Prevent recurrence on FreeBSD 12 hosts running krill:

  • Enable the daily security pkg audit in /etc/periodic.conf:

    daily_status_security_pkgaudit_enable="YES"
  • Subscribe to freebsd-security-notifications at lists.freebsd.org.

  • Mirror through a local pkg repository managed by poudriere:

    poudriere jail -c -j 12amd64 -v 12.4-RELEASE
    poudriere ports -c -p default
    poudriere bulk -j 12amd64 -p default <category>/krill
  • Version-pin sensitive packages:

    sudo pkg lock krill
  • Take an automatic ZFS boot-environment snapshot before every upgrade (ZFS root only):

    sudo bectl create pre-upgrade-$(date +%Y%m%d)
  • Monitor file integrity (create a baseline, verify against it later):

    # Create a baseline (use -c; target /usr/local/etc, /etc, /boot — NOT /):
    sudo mtree -c -K sha256digest -p /usr/local/etc > /var/db/usr-local-etc.mtree
    sudo mtree -c -K sha256digest -p /etc          > /var/db/etc.mtree
    # Verify later:
    sudo mtree -p /usr/local/etc < /var/db/usr-local-etc.mtree
    # Or with AIDE for a richer ruleset:
    sudo pkg install -y aide && sudo aide --init && sudo aide --check
  • Harden jails with allow.* tunables in /etc/jail.conf:

    krill_jail {
      allow.raw_sockets = 0;
      allow.sysvipc    = 0;
      allow.mount      = 0;
      allow.chflags    = 0;
    }

Issues that commonly surface alongside krill — vulnerability — patch and remediation guide: pkg lock contention, mismatched ABI after kernel/userland skew, pf rule drift, and stale shared-library references after upgrade. Triage with:

freebsd-version -kru
uname -K
pkg check -d
pfctl -sr

View all freebsd-12 tutorials on the Tutorials Hub →

Browse all common problems & solutions on the Tutorials Hub.

References & Further Reading

Primary reference: FreeBSD VuXML. Useful manual pages on FreeBSD 12:

man pkg
man freebsd-update
man pfctl
man ipfw
man bectl
man periodic.conf

Other resources: the FreeBSD Handbook, the FreeBSD Security Advisories at security.freebsd.org, and the /usr/ports/UPDATING file for port-specific notes implicated in krill — vulnerability — patch and remediation guide.