📖 ~4 min read • Source: Ubuntu Security Notice USN-6520-1
Related CVEs: CVE-2023-25775 CVE-2023-31083 CVE-2023-31085 CVE-2023-3772 CVE-2023-38430 CVE-2023-38432 CVE-2023-3863 CVE-2023-3865 +12 more
Upstream summary: Ivan D Barrera, Christopher Bednarz, Mustafa Ismail, and Shiraz Saleem
discovered that the InfiniBand RDMA driver in the Linux kernel did not
properly check for zero-length STAG or MR registration. A remote attacker
could possibly use this to execute arbitrary code. (CVE-2023-25775)
Yu Hao and Weiteng Chen discovered that the Bluetooth HCI UART driver in
the Linux kernel contained a race condition, leading to a null pointer
dereference vulnerability. A local attacker could u
Table of contents
Symptom & Impact
On Ubuntu 22.04 (jammy) hosts that have linux-starfive-6.2 installed, administrators report behaviour consistent with Ubuntu Security Notice USN-6520-1: apt reports pending security updates, services backed by linux-starfive-6.2 fail or restart unexpectedly, AppArmor denials appear in the kernel log, and — for security-rated advisories — the host is exposed to the vulnerability set above. Impact ranges from a single service-restart loop to wider availability incidents whenever linux-starfive-6.2 sits on the serving path.
Environment & Reproduction
Reproduction targets Ubuntu 22.04 (jammy). Confirm release and installed package:
lsb_release -a
cat /etc/os-release
dpkg -l linux-starfive-6.2 | tail -2
apt-cache policy linux-starfive-6.2
uname -r
Trigger the workflow that exposes linux-starfive-6.2 — multiple vulnerabilities (20 CVEs) — patch and remediation guide while collecting:
sudo journalctl -u linux-starfive-6.2 -b --no-pager | tail -200
sudo journalctl -xe --no-pager | tail -200
sudo tail -200 /var/log/apt/history.log
sudo tail -200 /var/log/kern.log | grep -i apparmor
Root Cause Analysis
Root cause is documented in Ubuntu Security Notice USN-6520-1. Canonical security maintainers shipped fixes in the corresponding linux-starfive-6.2 update for Ubuntu 22.04; running an outdated build leaves the host exposed to the failure modes described in the advisory. Fixes land in the jammy-security pocket of the main archive. Correlate apt history with the journal:
grep -A2 -B2 linux-starfive-6.2 /var/log/apt/history.log
zgrep -A2 -B2 linux-starfive-6.2 /var/log/apt/history.log.*.gz 2>/dev/null
cat /proc/sys/kernel/tainted # non-zero = tainted kernel / out-of-tree modules
Quick Triage
Run these on Ubuntu 22.04 to capture the current state of linux-starfive-6.2:
dpkg -l linux-starfive-6.2 | tail -1 # installed version
dpkg -V linux-starfive-6.2 # verify shipped files
sudo apt update && apt list --upgradable 2>/dev/null | grep -i security
systemctl is-active linux-starfive-6.2
sudo ufw status verbose 2>/dev/null | head -20
sudo aa-status 2>/dev/null | head -20
# If linux-starfive-6.2 ships a service unit (unit/job name often differs from pkg name, e.g.
# bind9→named, apache2→apache2, postgresql-NN→postgresql@NN-main):
systemctl list-unit-files | grep -i linux | head
Step-by-Step Diagnosis
-
List failing services.
systemctl --failed --no-pager -
Tail the journal / syslog for
linux-starfive-6.2.sudo journalctl -u linux-starfive-6.2 -f --no-pager sudo journalctl -xe -f --no-pager -
Inspect UFW (Uncomplicated Firewall) state.
sudo ufw status numbered sudo ufw show added sudo iptables -L -n -v | head -30 -
Surface AppArmor denials and switch the profile to complain mode if needed.
sudo journalctl -k 2>/dev/null | grep -i 'apparmor="DENIED"' | tail -30 sudo aa-status # /etc/apparmor.d/usr.bin.linux-starfive-6.2 or usr.sbin.linux-starfive-6.2 — inspect first sudo aa-complain /etc/apparmor.d/usr.bin.linux-starfive-6.2 2>/dev/null || true -
Verify
linux-starfive-6.2integrity and reinstall if anything is altered.sudo dpkg -V linux-starfive-6.2 sudo debsums -c linux-starfive-6.2 2>/dev/null sudo apt install --reinstall -y linux-starfive-6.2 -
Correlate findings with
/var/log/apt/history.log,/var/log/dpkg.log, and Ubuntu Security Notice USN-6520-1 to pin the change that introduced linux-starfive-6.2 — multiple vulnerabilities (20 CVEs) — patch and remediation guide.
Solution – Primary Fix
Apply the corrective apt transaction referenced by Ubuntu Security Notice USN-6520-1, then reload the affected service:
sudo apt update
sudo apt -y install --only-upgrade linux-starfive-6.2
sudo systemctl daemon-reload
# Service name may differ from pkg name; check first:
systemctl list-unit-files | grep -i linux | head
sudo systemctl restart linux-starfive-6.2
dpkg -l linux-starfive-6.2 | tail -1 # confirm new version
systemctl is-active linux-starfive-6.2
For kernel / glibc / systemd / openssl advisories a reboot (or Livepatch) is required:
sudo apt install -y needrestart
sudo needrestart -r l # list units that need restart
sudo systemctl reboot # or: sudo shutdown -r now
# Livepatch (Ubuntu Pro) avoids reboot for many kernel CVEs:
sudo canonical-livepatch status
sudo canonical-livepatch refresh
Need help rolling this patch across an Ubuntu fleet? Our IT Solutions & Services team manages Ubuntu patch windows with Landscape and Ubuntu Pro integration. Get in touch for a free consultation.
Solution – Alternative Approaches
If the primary upgrade is not viable, pick from these:
-
Hold the package so apt cannot upgrade it:
sudo apt-mark hold linux-starfive-6.2 apt-mark showhold | grep linux-starfive-6.2 # Release the hold later with: sudo apt-mark unhold linux-starfive-6.2 -
Pin a known-good version via apt preferences:
# /etc/apt/preferences.d/linux-starfive-6.2.pref Package: linux-starfive-6.2 Pin: version <good-version> Pin-Priority: 1001 -
Downgrade to an older version if a regression is suspected:
apt-cache madison linux-starfive-6.2 sudo apt install --allow-downgrades -y linux-starfive-6.2=<older-version> -
Investigate AppArmor blocking the new binary; switch to complain briefly, capture denials, then re-enforce:
sudo aa-complain /etc/apparmor.d/usr.bin.linux-starfive-6.2 2>/dev/null # reproduce the failure sudo journalctl -k | grep apparmor | tail sudo aa-enforce /etc/apparmor.d/usr.bin.linux-starfive-6.2 2>/dev/null -
Apply Canonical Livepatch (Ubuntu Pro) to land kernel fixes without reboot:
sudo canonical-livepatch status sudo canonical-livepatch refresh -
Take only the security pocket update and defer the full point-release upgrade:
sudo apt -y install --only-upgrade -t jammy-security linux-starfive-6.2
Verification & Acceptance Criteria
All of these should pass after the fix is applied:
dpkg -l linux-starfive-6.2 | tail -1 # expected fixed version
apt list --upgradable 2>/dev/null | grep -i security || echo OK
systemctl is-active linux-starfive-6.2
sudo journalctl -u linux-starfive-6.2 --since "5 minutes ago" --no-pager | grep -iE "error|fail" || echo OK
sudo ufw status numbered | head
sudo aa-status 2>/dev/null | head -5
The original reproduction for linux-starfive-6.2 — multiple vulnerabilities (20 CVEs) — patch and remediation guide must not trigger across two consecutive runs.
Rollback Plan
Capture state before any change:
apt list --installed 2>/dev/null > /root/apt-pre.txt
dpkg --get-selections > /root/dpkg-pre.txt
# ZFS-on-root (Ubuntu 20.04+ default installer option):
sudo zfs snapshot rpool/ROOT/ubuntu@pre-linux-starfive-6-2
# LVM-on-root:
sudo lvcreate -L 4G -s -n root_pre_patch /dev/<vg>/<root-lv>
To revert:
sudo apt install --allow-downgrades -y linux-starfive-6.2=<old-version>
sudo systemctl daemon-reload
sudo systemctl restart linux-starfive-6.2
# Kernel rollback: pick the prior kernel from the GRUB menu, then:
sudo systemctl reboot
# ZFS rollback (rolls the whole root dataset):
sudo zfs rollback -r rpool/ROOT/ubuntu@pre-linux-starfive-6-2
Prevention & Hardening
Reduce the chance of this recurring on Ubuntu 22.04 (jammy):
-
Enable scheduled security updates via
unattended-upgrades:sudo apt install -y unattended-upgrades update-notifier-common sudo dpkg-reconfigure -plow unattended-upgrades # /etc/apt/apt.conf.d/50unattended-upgrades: Unattended-Upgrade::Allowed-Origins { "${distro_id}:${distro_codename}-security"; }; -
Install
needrestartso services restart automatically after library upgrades:sudo apt install -y needrestart # /etc/needrestart/needrestart.conf -> $nrconf{restart} = 'a'; -
Attach Ubuntu Pro to enable Livepatch and extended security coverage:
sudo pro attach <token> sudo pro enable livepatch -
Subscribe to ubuntu-security-announce and watch ubuntu.com/security/cves.
-
Monitor file integrity with
debsumsand AIDE:sudo apt install -y debsums aide sudo debsums -ca sudo aideinit && sudo mv /var/lib/aide/aide.db.new /var/lib/aide/aide.db sudo aide --check -
For estate-wide patching, manage with Canonical Landscape:
sudo apt install -y landscape-client sudo landscape-config -
Keep AppArmor profiles in enforce mode and apply CIS Ubuntu Linux Benchmark hardening.
Related Errors & Cross-Refs
Issues that commonly surface alongside linux-starfive-6.2 — multiple vulnerabilities (20 CVEs) — patch and remediation guide: apt lock contention, broken dpkg state, systemd ordering cycles, AppArmor denials, and UFW rule drift. Useful triage:
sudo dpkg --configure -a
sudo apt --fix-broken install
systemd-analyze critical-chain
sudo journalctl -k 2>/dev/null | grep -i apparmor | tail
cat /proc/sys/kernel/tainted
View all ubuntu-22-04 tutorials on the Tutorials Hub →
Browse all common problems & solutions on the Tutorials Hub.
References & Further Reading
Primary reference: Ubuntu Security Notice USN-6520-1. Manual pages useful on Ubuntu 22.04:
man apt
man apt-get
man apt-mark
man dpkg
man systemctl
man journalctl
man ufw
man apparmor
man aa-status
man unattended-upgrades
man canonical-livepatch
man pro
Other resources: Ubuntu Security Notices, Ubuntu CVE Tracker, Ubuntu upgrade notes, and per-package notes in /usr/share/doc/linux-starfive-6.2/ for components implicated in linux-starfive-6.2 — multiple vulnerabilities (20 CVEs) — patch and remediation guide.