Affected versions: FreeBSD 14

📖 ~4 min read  •  Source: FreeBSD VuXML

VuXML topic: wordpress — multiple issues

Upstream summary: wordpress developers reports: Ten security issues affect WordPress versions 5.5.1 and earlier. If you havent yet updated to 5.5, all WordPress versions since 3.7 have also been updated to fix the following security issues: -Props to Alex Concha of the WordPress Security Team for their work in hardening deserialization requests. -Props to David Binovec on a fix to disable spam embeds from disabled sites on a multisite network. -Thanks to Marc Montas from Sucuri for reporting a

Table of contents
  1. Symptom & Impact
  2. Environment & Reproduction
  3. Root Cause Analysis
  4. Quick Triage
  5. Step-by-Step Diagnosis
  6. Solution – Primary Fix
  7. Solution – Alternative Approaches
  8. Verification & Acceptance Criteria
  9. Rollback Plan
  10. Prevention & Hardening
  11. Related Errors & Cross-Refs
  12. References & Further Reading

Symptom & Impact

On FreeBSD 14 hosts that have zh_TW-wordpress installed, operators see behaviour consistent with the FreeBSD VuXML entry: pkg audit flags the installed version; any daemon, CLI tool, or application linked against zh_TW-wordpress may misbehave or fail to start after upgrade; and — for security-rated advisories — the host is exposed to the vulnerabilities above. Impact ranges from a single restart cycle to full availability incidents on jails, bhyve guests, or downstream consumers that depend on zh_TW-wordpress.

Environment & Reproduction

Reproduction targets FreeBSD 14. Confirm release, installed package, and capture baseline state:

freebsd-version -kru
uname -a
pkg info zh_TW-wordpress
pkg query "%n-%v" zh_TW-wordpress
pkg audit -F
service -e

Trigger the workflow that exposes zh_TW-wordpress — security advisory — patch and remediation guide while collecting:

tail -200 /var/log/messages
dmesg -a | tail -200
tail -200 /var/log/pkg.log

Root Cause Analysis

Root cause is tracked at FreeBSD VuXML. The FreeBSD ports security team shipped a corrective zh_TW-wordpress port revision; hosts on an outdated build remain exposed. Correlate package logs with system logs and kernel state to isolate the change that triggered the failure mode:

tail -500 /var/log/pkg.log
tail -500 /var/log/messages
sysctl kern.lastpid
sysctl kern.osreldate     # numeric __FreeBSD_version, e.g. 1400097

Quick Triage

Run these checks on FreeBSD 14 to confirm the failure mode and current state of zh_TW-wordpress:

pkg version -v zh_TW-wordpress                # installed vs available version
pkg audit zh_TW-wordpress                     # advisory match for this package
tail -100 /var/log/messages
dmesg -a | tail -100
kldstat                              # kernel module state (for kernel/driver pkgs)
pfctl -sr 2>/dev/null || ipfw list   # only if pf/ipfw is enabled
# If zh_TW-wordpress ships an rc.d service (script name may differ from the pkg name,
# e.g. bind918→named, php83→php-fpm), check it:
service -e | grep -i zh_TW-wordpress && service <rc-script-name> status

Step-by-Step Diagnosis

  1. List enabled services (only relevant if the package provides one).

    service -e
  2. Follow live logs.

    tail -F /var/log/messages
    dmesg
  3. Validate firewall rules (skip if neither pf nor ipfw is enabled).

    pfctl -sr -v 2>/dev/null || ipfw show
  4. Check package integrity for zh_TW-wordpress.

    pkg check -B zh_TW-wordpress
    pkg check -d zh_TW-wordpress    # verify shared-library deps
  5. Reinstall zh_TW-wordpress if integrity check fails.

    pkg install -fy zh_TW-wordpress
  6. Correlate findings with /var/log/pkg.log and FreeBSD VuXML to pin the commit that introduced zh_TW-wordpress — security advisory — patch and remediation guide.

Solution – Primary Fix

Install the corrective zh_TW-wordpress port revision referenced by FreeBSD VuXML:

sudo pkg update
sudo pkg upgrade zh_TW-wordpress              # or: sudo pkg upgrade -y for the whole system
# If zh_TW-wordpress provides an rc.d service, restart it (script name may differ from pkg name):
# sudo service <rc-script-name> restart
pkg audit zh_TW-wordpress                    # confirm no remaining advisory for this package

For ports-tree builders (FreeBSD 13.x and earlier used portsnap; on FreeBSD 14+ the ports tree is fetched with Git):

# FreeBSD 14+ (portsnap was removed):
sudo pkg install -y git-lite
sudo git clone --depth 1 https://git.FreeBSD.org/ports.git /usr/ports
# FreeBSD 13.x and earlier:
# sudo portsnap fetch update
cd /usr/ports/<category>/zh_TW-wordpress
sudo make deinstall reinstall clean

Reboot only if the package ships a kernel module or replaces a shared library used by long-running daemons.

Need help rolling this patch across a FreeBSD fleet? Our IT Solutions & Services team manages FreeBSD jail/bhyve patch windows. Get in touch for a free consultation.

Solution – Alternative Approaches

If the primary fix is not viable, choose from these alternatives:

  • Lock the package until the fix is vetted:

    sudo pkg lock zh_TW-wordpress
  • Downgrade to a known-good revision. pkg install pkgname-VERSION is not a real downgrade syntax — fetch a specific build instead:

    # 1. Discover available versions across configured repos:
    pkg search -e zh_TW-wordpress
    pkg rquery -r FreeBSD-quarterly '%n-%v' zh_TW-wordpress
    # 2. Install from a specific saved .pkg file:
    sudo pkg add -f /path/to/zh_TW-wordpress-<older-version>.pkg
    # 3. Or switch the host repo to the quarterly branch (see snippet below) and:
    sudo pkg upgrade -fr FreeBSD-quarterly zh_TW-wordpress
  • Switch the pkg repository between quarterly and latest by editing /usr/local/etc/pkg/repos/FreeBSD.conf:

    FreeBSD: {
      url: "pkg+https://pkg.FreeBSD.org/${ABI}/quarterly",
      mirror_type: "srv",
      signature_type: "fingerprints",
      fingerprints: "/usr/share/keys/pkg",
      enabled: yes
    }
  • Isolate the affected service in a jail with stricter firewall rules:

    iocage create -n zh_TW-wordpress-jail -r 14.1-RELEASE
    iocage set allow_raw_sockets=0 zh_TW-wordpress-jail
    # or with Bastille:
    bastille create zh_TW-wordpress-jail 14.1-RELEASE 10.0.0.10
  • Replace the service with a vendored static build for the period between exposure detection and full rollout.

Verification & Acceptance Criteria

All of these should pass after the fix:

pkg info zh_TW-wordpress                # shows the expected fixed version
pkg audit zh_TW-wordpress               # no advisory for this package (exit code 0)
tail -50 /var/log/messages   # no new errors after upgrade
# If zh_TW-wordpress ships a service, confirm it is running under its rc.d name:
# service <rc-script-name> status

The original reproduction for zh_TW-wordpress — security advisory — patch and remediation guide must not trigger across two consecutive runs.

Rollback Plan

Capture state before any change (only ZFS root has boot environments — UFS hosts skip bectl):

pkg query "%n-%v" > /root/pkg-pre.txt
# ZFS-on-root only:
sudo bectl create pre-zh_TW-wordpress-patch

To revert if the upgrade is bad, reinstall the previously saved .pkg file:

sudo pkg add -f /var/cache/pkg/zh_TW-wordpress-<previous-version>.pkg
# Or activate the pre-patch boot environment and reboot (ZFS-on-root only):
sudo bectl activate pre-zh_TW-wordpress-patch
sudo shutdown -r now

For kernel/loader changes on a UFS host, boot the previous kernel from the loader prompt (press 3 at the menu, then boot kernel.old).

Prevention & Hardening

Prevent recurrence on FreeBSD 14 hosts running zh_TW-wordpress:

  • Enable the daily security pkg audit in /etc/periodic.conf:

    daily_status_security_pkgaudit_enable="YES"
  • Subscribe to freebsd-security-notifications at lists.freebsd.org.

  • Mirror through a local pkg repository managed by poudriere:

    poudriere jail -c -j 14amd64 -v 14.1-RELEASE
    poudriere ports -c -p default
    poudriere bulk -j 14amd64 -p default <category>/zh_TW-wordpress
  • Version-pin sensitive packages:

    sudo pkg lock zh_TW-wordpress
  • Take an automatic ZFS boot-environment snapshot before every upgrade (ZFS root only):

    sudo bectl create pre-upgrade-$(date +%Y%m%d)
  • Monitor file integrity (create a baseline, verify against it later):

    # Create a baseline (use -c; target /usr/local/etc, /etc, /boot — NOT /):
    sudo mtree -c -K sha256digest -p /usr/local/etc > /var/db/usr-local-etc.mtree
    sudo mtree -c -K sha256digest -p /etc          > /var/db/etc.mtree
    # Verify later:
    sudo mtree -p /usr/local/etc < /var/db/usr-local-etc.mtree
    # Or with AIDE for a richer ruleset:
    sudo pkg install -y aide && sudo aide --init && sudo aide --check
  • Harden jails with allow.* tunables in /etc/jail.conf:

    zh_TW-wordpress_jail {
      allow.raw_sockets = 0;
      allow.sysvipc    = 0;
      allow.mount      = 0;
      allow.chflags    = 0;
    }

Issues that commonly surface alongside zh_TW-wordpress — security advisory — patch and remediation guide: pkg lock contention, mismatched ABI after kernel/userland skew, pf rule drift, and stale shared-library references after upgrade. Triage with:

freebsd-version -kru
uname -K
pkg check -d
pfctl -sr

View all freebsd-14 tutorials on the Tutorials Hub →

Browse all common problems & solutions on the Tutorials Hub.

References & Further Reading

Primary reference: FreeBSD VuXML. Useful manual pages on FreeBSD 14:

man pkg
man freebsd-update
man pfctl
man ipfw
man bectl
man periodic.conf

Other resources: the FreeBSD Handbook, the FreeBSD Security Advisories at security.freebsd.org, and the /usr/ports/UPDATING file for port-specific notes implicated in zh_TW-wordpress — security advisory — patch and remediation guide.