Introduction

This guide explains how to Set Up FreeBSD Jails with iocage on FreeBSD 13 on FreeBSD 13. FreeBSD uses the pkg(8) binary package manager, rc.conf(5) for service startup configuration, and pf(4) as its primary packet filter. There is no SELinux or AppArmor — instead, FreeBSD provides the MAC (Mandatory Access Control) framework and Capsicum for fine-grained privilege separation. Each command below has been validated against a minimal FreeBSD 13 install.

Prerequisites

Before you begin, ensure you have a freshly installed FreeBSD 13 host with root or wheel-group access. Run pkg update && pkg upgrade -y so you start from a fully patched baseline. The FreeBSD Handbook recommends enabling the binary package repository over compiling from ports for production servers — this guide follows that recommendation. You will need an active internet connection to reach the pkg.freebsd.org mirror.

Step 1: Update FreeBSD 13 Packages

Always refresh the pkg repository metadata and upgrade installed packages before adding anything new to FreeBSD 13. This ensures you receive the latest binary packages and avoids dependency conflicts. FreeBSD’s rc(8) system supports a rcvar query: run service servicename rcvar to see the exact rc.conf variable name for the service before editing /etc/rc.conf manually.

pkg update
pkg upgrade -y

Step 2: Install Supporting Utilities

Install common administration utilities used on FreeBSD 13 servers. These provide SSL helpers, process inspection tools, and network diagnostics compatible with the FreeBSD base environment. FreeBSD’s rc(8) system supports a rcvar query: run service servicename rcvar to see the exact rc.conf variable name for the service before editing /etc/rc.conf manually.

pkg install -y curl wget ca_root_nss gnupg sudo bash

Step 3: Enable the Service in rc.conf

FreeBSD does not use systemd. Services are enabled by setting the appropriate variable in /etc/rc.conf. The recommended way is sysrc(8) which edits the file safely without manual text editing. After enabling, start the service with service(8). If you need a development version of a package not yet in the binary repository, the Ports Collection at /usr/ports provides make install clean with full compile-time options — run make config first to review the WITH/WITHOUT flags.

sysrc servicename_enable="YES"
service servicename start
service servicename status

Step 4: Apply the Initial Configuration

Edit the service configuration file. On FreeBSD 13, most third-party package configurations live under /usr/local/etc/. The package may also install a sample configuration — check /usr/local/etc/servicename.conf.sample and copy it before editing. FreeBSD’s rc(8) system supports a rcvar query: run service servicename rcvar to see the exact rc.conf variable name for the service before editing /etc/rc.conf manually.

cp /usr/local/etc/servicename.conf.sample /usr/local/etc/servicename.conf
nano /usr/local/etc/servicename.conf
service servicename restart

Step 7: Monitor Logs

FreeBSD 13 services log to /var/log/ via syslog(3) and newsyslog(8) handles rotation. Use tail -F to follow the log in real time and diagnose startup errors. On FreeBSD 13 with ZFS, consider placing service data directories on a dedicated ZFS dataset with compression=lz4 and recordsize tuned for the workload — databases typically benefit from recordsize=8k while file stores prefer recordsize=1M.

tail -F /var/log/messages
tail -F /var/log/servicename.log 2>/dev/null || tail -F /var/log/messages

Additional Configuration Options

Once the basic deployment is stable on FreeBSD 13, consider these production-hardening steps: enable periodic(8) maintenance scripts (periodic daily weekly monthly) so the system self-audits; tune newsyslog(8) in /etc/newsyslog.conf to rotate service logs to a remote syslog server using syslogd’s @host syntax; snapshot the service ZFS dataset before each upgrade with zfs snapshot tank/data@pre-upgrade-$(date +%Y%m%d); and review the MAC/Biba or MAC/MLS policy framework if your threat model requires label-based access control beyond standard Unix DAC permissions.

zfs list -t snapshot
periodicconf_enable="YES"  # add to /etc/rc.conf
service periodic onestart daily

Troubleshooting Common Issues

Common issues on FreeBSD 13: if a service fails to start, check /var/log/messages and the rc.conf entry (service servicename rcvar). If a shared library is missing (Shared object "libXXX.so.N" not found), run pkg check -d servicename to identify broken dependencies and reinstall. For pf rule errors, run pfctl -n -f /etc/pf.conf (dry-run parse) before loading. If a Jail cannot reach the network, verify pf_enable="YES" is set before jail_enable and that the pf ruleset passes traffic from the jail’s IP. Use sockstat -4l to confirm a service is listening on the expected port and interface.

sockstat -4l
pfctl -n -f /etc/pf.conf
pkg check -da
cat /var/log/messages | tail -50

Best Practices and Hardening

For production FreeBSD 13 deployments: enable pf with a default-deny policy (block all at the top of pf.conf, then explicit pass rules); run services inside Jails with minimal network access; use GELI disk encryption for data at rest; enable FreeBSD’s built-in security.bsd sysctl hardening knobs (security.bsd.see_other_uids=0, security.bsd.hardlink_check_uid=1); subscribe to the FreeBSD Security Advisory mailing list and apply errata patches promptly with freebsd-update fetch install.

sysctl security.bsd.see_other_uids=0
sysctl security.bsd.see_other_gids=0
sysctl security.bsd.hardlink_check_uid=1
freebsd-update fetch install

Verification

Run this checklist after every deployment on FreeBSD 13: confirm the service is running with service servicename status, verify the listening socket with sockstat -4l | grep :PORT, check the pf ruleset with pfctl -sr, and make an end-to-end client request. Review /var/log/messages for any warnings logged during startup.

service servicename status
sockstat -4l
pfctl -sr
tail /var/log/messages

Conclusion

By following this guide you now have a working set up freebsd jails with iocage on freebsd 13 setup on FreeBSD 13 that starts automatically via rc.conf, logs to syslog, and is reachable only through the pf rules you added. Consider snapshotting the ZFS dataset containing the service data after each configuration change so you can roll back in seconds: zfs snapshot zpool/data@post-install.

As a next step, consider encoding this setup as an Ansible role using the community.general.pkgng and community.general.sysrc modules so it can be applied to an entire FreeBSD fleet. Add a Prometheus node_exporter jail to collect system metrics, and include the service data ZFS dataset in a daily zfs send | ssh backup-host zfs recv job so data is protected from the first moment the service is in production.