Alpine Linux 3.20 — ark — multiple vulnerabilities (2 CVEs) — patch and remediation guide

📖 ~4 min read  •  Source: Alpine secdb entry — ark 20.08.0-r1

Related CVEs: CVE-2020-24654 CVE-2020-16116

Upstream summary: Alpine community repository for vv3.20 ships ark 20.08.0-r1 which addresses CVE-2020-24654.

Table of contents

1. Symptom & Impact
2. Environment & Reproduction
3. Root Cause Analysis
4. Quick Triage
5. Step-by-Step Diagnosis
6. Solution – Primary Fix
7. Solution – Alternative Approaches
8. Verification & Acceptance Criteria
9. Rollback Plan
10. Prevention & Hardening
11. Related Errors & Cross-Refs
12. References & Further Reading

Symptom & Impact

Exploitation of ark is user-driven: the danger arrives when someone opens a hostile page, message or attachment, so exposure sits on each Alpine Linux 3.20 workstation rather than on any serving path. Desktop sessions run for weeks, and the package manager only replaces files on disk — a ark process started before the update keeps the old code mapped until the user quits and relaunches it. Consequences are local: theft of saved credentials and session cookies, access to the user’s profile data under $HOME, and code execution as the logged-in account. ark is a graphical application launched by a user from their desktop session, not a system service: there is no service to restart, and rc-service or /var/log/messages will report nothing for it.

Environment & Reproduction

Reproduction targets Alpine Linux 3.20. Confirm release and the installed package:

cat /etc/alpine-release
cat /etc/os-release
apk info -v ark
apk policy ark
apk version | grep -w ark || true

Exercise the workload that uses ark while collecting:

sudo tail -200 /var/log/messages       # busybox syslog / syslog-ng
sudo dmesg | tail -200
sudo rc-status
sudo apk audit --system

Root Cause Analysis

Root cause is recorded in Alpine secdb entry — ark 20.08.0-r1. Alpine maintainers shipped the fix in 20.08.0-r1 for Alpine Linux 3.20; running an older build leaves the host exposed. Correlate apk transactions with the kernel ring buffer and OpenRC logs:

sudo tail -200 /var/log/apk.log
apk info -v ark
apk info -L ark | head
sudo dmesg --ctime | tail -100
ls -lt /var/log/rc.log 2>/dev/null && sudo tail -100 /var/log/rc.log

Quick Triage

Run these on Alpine Linux 3.20 to capture the current state of ark:

apk info -v ark                       # installed version
apk policy ark                        # repository / pin info
apk version -l '<'                       # all packages with newer candidates
sudo apk audit --system
apk info -L ark | head                # files shipped by ark
sudo rc-status                           # OpenRC runtime state
sudo rc-update show                      # services per runlevel
sudo iptables -L -n -v --line-numbers 2>/dev/null | head -40
sudo nft list ruleset 2>/dev/null | head -40
# If ark ships an OpenRC service (init name may differ from pkg name,
# e.g. nginx, postgresql, php-fpm83):
ls /etc/init.d/ | grep -i ark | head

Step-by-Step Diagnosis

1. List OpenRC services and any failed ones.

   sudo rc-status
   sudo rc-status --crashed

2. Inspect logs for ark.

   sudo grep -i ark /var/log/messages | tail -200
   sudo dmesg | tail -200

3. Inspect firewall posture (Alpine ships iptables/nftables or the awall front-end).

   sudo iptables -L -n -v --line-numbers
   sudo nft list ruleset
   sudo awall list 2>/dev/null || true

4. Verify ark integrity and reinstall if files are altered.

   sudo apk verify ark
   sudo apk fix ark

5. Confirm the current vs. available version for ark.

   apk version | grep -w ark || true
   apk policy ark

6. Correlate findings with /var/log/apk.log and Alpine secdb entry — ark 20.08.0-r1 to pin the change that introduced the regression.

Solution – Primary Fix

Apply the corrective apk transaction referenced by Alpine secdb entry — ark 20.08.0-r1, then restart affected OpenRC services:

sudo apk update
sudo apk upgrade --available --no-cache       # apply all repository updates
# Or target a single package:
sudo apk add --upgrade ark
apk info -v ark                              # confirm new version
sudo rc-update add ark default 2>/dev/null || true

For kernel / musl / openssl updates a reboot is required (Alpine has no live-patching equivalent of kpatch):

apk info -v linux-lts linux-virt 2>/dev/null
sudo sync && sudo reboot
# On Alpine diskless / lbu installations, commit the change first:
sudo lbu status
sudo lbu commit -d

Solution – Alternative Approaches

If the primary patch is not viable, choose from these:

• Roll back to a known-good version by installing a pinned version from /etc/apk/cache:

  ls /etc/apk/cache/ | head
  sudo apk add ark=20.08.0-r1     # downgrade / pin to a specific version
  sudo apk fix

• Hold the package so apk cannot upgrade it during the next apk upgrade:

  echo 'ark' | sudo tee -a /etc/apk/world
  # To pin a version, edit /etc/apk/world to read: ark=20.08.0-r1
  sudo apk fix

• Pull the fix from edge while staying on a stable release (tagged repo):

  echo '@edge https://dl-cdn.alpinelinux.org/alpine/edge/main' | sudo tee -a /etc/apk/repositories
  sudo apk add ark@edge

• Use awall to ring-fence the affected service while you patch:

  sudo apk add awall
  sudo awall list
  sudo awall enable <policy>
  sudo awall activate

• Take an lbu snapshot of /etc before kernel / musl upgrades (Alpine diskless mode):

  sudo lbu status
  sudo lbu package /var/backups/alpine-pre-upgrade.apkovl.tar.gz
  # Revert later by booting from media and restoring the apkovl tarball.

• For container deployments, rebuild the image from a patched base:

  docker run --rm alpine:20 apk version | grep -w ark || true
  # In your Dockerfile, force a refresh: RUN apk add --no-cache --upgrade ark

Verification & Acceptance Criteria

All of these should pass after the fix:

apk info -v ark                              # expected fixed version
sudo apk audit --system                         # the package no longer flagged
sudo apk verify ark
sudo grep -iE 'error|fail' /var/log/messages | grep -i ark | tail -50 || echo OK
sudo iptables -L -n -v | head -20
sudo nft list ruleset | head -20

The conditions described in the advisory must no longer be reported for ark across two consecutive runs.

Rollback Plan

Capture state before any change:

apk info -v > /root/apk-pre.txt
sudo cp /etc/apk/world /root/world-pre
sudo cp -a /var/log/apk.log /root/apk.log-pre 2>/dev/null || true
# On lbu / diskless installs, snapshot the apkovl:
sudo lbu package /var/backups/alpine-pre-upgrade.apkovl.tar.gz

To revert if the patch is bad:

# Reinstall the previous version from /etc/apk/cache (must be mounted):
ls /etc/apk/cache/ | head
sudo apk add ark=<previous-version>
# Or restore the saved apkovl on diskless:
sudo tar -xzf /var/backups/alpine-pre-upgrade.apkovl.tar.gz -C /
sudo reboot

Prevention & Hardening

Reduce the chance of this recurring on Alpine Linux 3.20:

• Run apk audit --system on a schedule and fail builds on new findings:

  # /etc/periodic/daily/apk-audit
  #!/bin/sh
  apk update -q && apk audit --system > /var/log/apk-audit.log

• Mount /etc/apk/cache so previous versions are always available for rollback:

  sudo mkdir -p /etc/apk/cache
  sudo setup-apkcache /etc/apk/cache

• Subscribe to alpine-security and watch security.alpinelinux.org for new CVE entries.

• Mirror the Alpine repository locally for controlled rollouts:

  sudo apk add rsync
  rsync -av --delete rsync://rsync.alpinelinux.org/alpine/v3.20/main/ /srv/mirror/v3.20/main/
  rsync -av --delete rsync://rsync.alpinelinux.org/alpine/v3.20/community/ /srv/mirror/v3.20/community/

• Pin sensitive packages in /etc/apk/world with explicit versions so apk cannot silently bump them.

• Alpine does not enable mandatory-access-control frameworks (such as AppArmor) by default; consult [grsecurity/PaX] or [seccomp profile] in container deployments and apply CIS-style hardening for Alpine Linux 3.20 (disable unused OpenRC services, set rc_logger=YES in /etc/rc.conf, mount /tmp with nosuid,nodev).

• For container fleets, scan images in CI:

  docker run --rm alpine:20 apk version
  trivy image --severity HIGH,CRITICAL myrepo/app:tag

Related Errors & Cross-Refs

Issues that commonly surface alongside a ark update: apk lock contention (/var/lib/apk/lock), OpenRC dependency cycles, busybox applet quirks vs. coreutils, and musl-vs-glibc behavioural differences. Useful triage:

sudo apk fix
sudo rc-status --crashed
ls /var/lib/apk/lock 2>/dev/null
sudo grep -i busybox /var/log/messages | tail
cat /proc/sys/kernel/tainted

View all alpine-3-20 tutorials on the Tutorials Hub →

Browse all common problems & solutions on the Tutorials Hub.

References & Further Reading

Primary reference: Alpine secdb entry — ark 20.08.0-r1. Manual pages useful on Alpine Linux 3.20:

apk --help
man apk
man rc-service
man rc-update
man rc-status
man iptables
man nft
man awall
man lbu

Other resources: wiki.alpinelinux.org, security.alpinelinux.org, pkgs.alpinelinux.org, and per-package notes in /usr/share/doc/ark/ for components implicated in this advisory.

View all Alpine Linux 3.20 tutorials on the Tutorials Hub →