SLES 15 — ftdump — multiple vulnerabilities (20 CVEs) — patch and remediation guide

📖 ~4 min read  •  Source: SUSE advisory ESSA-2025:2834 (see also SUSE bugzilla)

Related CVEs: CVE-2025-27363 CVE-2020-15999 CVE-2023-2004 CVE-2022-27404 CVE-2022-27405 CVE-2022-27406 CVE-2014-2240 CVE-2014-9656  +12 more

Upstream summary: An out of bounds write exists in FreeType versions 2.13.0 and below (newer versions of FreeType are not vulnerable) when attempting to parse font subglyph structures related to TrueType GX and variable font files. The vulnerable code assigns a signed short value to an unsigned long and then adds a static value causing it to wrap around and allocate too small of a heap buffer. The code then writes up to 6 signed long integers out of bounds relative to this buffer. This may res

Table of contents

1. Symptom & Impact
2. Environment & Reproduction
3. Root Cause Analysis
4. Quick Triage
5. Step-by-Step Diagnosis
6. Solution – Primary Fix
7. Solution – Alternative Approaches
8. Verification & Acceptance Criteria
9. Rollback Plan
10. Prevention & Hardening
11. Related Errors & Cross-Refs
12. References & Further Reading

Symptom & Impact

Nothing visibly changes on a SLES 15 host until ftdump is next invoked: it runs, exits and leaves no daemon behind, so there is no restart loop or service log to watch. Exposure is per-invocation, and the invocations that matter are the unattended ones — cron jobs, backup and deployment scripts, CI runners, and anything passing attacker-influenced input such as a remote URL, a supplied archive or an untrusted filename. Where ftdump is run under sudo or from a privileged job, the same flaw becomes local privilege escalation. ftdump ships command-line programs that run when invoked and then exit, so there is no unit to restart — systemctl and journalctl -u have nothing to act on; only the next invocation matters.

Environment & Reproduction

Reproduction targets SLES 15. Confirm release, registration, and installed package:

cat /etc/os-release
SUSEConnect --status-text
SUSEConnect --list-extensions 2>/dev/null | head -30
rpm -q ftdump
zypper info ftdump | head -20

Exercise the workload that uses ftdump while collecting:

sudo journalctl -xe --no-pager | tail -200
sudo tail -200 /var/log/zypp/history
sudo tail -200 /var/log/audit/audit.log
# For SUSE support, bundle evidence with supportconfig:
sudo supportconfig -R /var/tmp -B ftdump

Root Cause Analysis

Root cause is documented in SUSE advisory ESSA-2025:2834. SUSE security maintainers shipped fixes in the corresponding ftdump update for SLES 15; running an outdated build leaves the host exposed to the failure modes described in the advisory. Correlate zypper history with system logs:

sudo zypper history | grep ftdump
sudo zypper history --since='-7 days' | tail -40
sudo journalctl -k | grep -i apparmor | tail -100
cat /proc/sys/kernel/tainted   # non-zero = tainted kernel / out-of-tree modules

Quick Triage

Run these on SLES 15 to capture the current state of ftdump:

rpm -q ftdump                              # installed NVR
rpm -V ftdump                              # verify shipped files
sudo zypper patch-check                    # open patches
sudo zypper lp -r SUSE-SLE-Server-15-* 2>/dev/null | head
systemctl --failed --no-pager
sudo firewall-cmd --list-all
sudo aa-status                              # AppArmor profiles
rpm -ql ftdump | grep -E '^/(usr/lib|etc)/systemd/(system|user)/[^/]+\.(service|socket|timer|path|target|mount)$'  # the units ftdump REALLY ships - NO OUTPUT means it ships no service at all, so never run systemctl on it
rpm -ql ftdump | grep -E '^/usr/sbin/rc[^/]+$'  # SUSE-only rcNAME compat symlink (it points at /usr/sbin/service, not at a unit): the NAME after 'rc' IS the service name - bind ships /usr/sbin/rcnamed, so the unit is named.service

Step-by-Step Diagnosis

1. List failed systemd units.

   systemctl --failed --no-pager

2. Tail the journal for ftdump and the system bus.

   sudo journalctl -xe -f --no-pager

3. Inspect firewall posture (firewalld is the default on SLES 15+).

   sudo firewall-cmd --list-all-zones --permanent
   sudo nft list ruleset 2>/dev/null | head -50

4. Surface AppArmor denials and switch the profile to complain mode if needed.

   sudo journalctl -k | grep -i 'apparmor="DENIED"' | tail -30
   sudo aa-status

5. Verify ftdump integrity and reinstall if anything is altered.

   sudo rpm -V ftdump
   sudo zypper verify
   sudo zypper install --force ftdump

6. Correlate findings with /var/log/zypp/history, zypper history, and SUSE advisory ESSA-2025:2834 to pin the change that introduced the regression.

Solution – Primary Fix

Apply the corrective zypper transaction referenced by SUSE advisory ESSA-2025:2834, then reload affected systemd units:

sudo zypper ref                        # refresh repos
sudo zypper -n patch                   # apply ALL open patches (recommended)
# Or target a single package:
sudo zypper -n update ftdump
# Unit name may differ from pkg name; check first:
rpm -q ftdump                           # confirm new NVR

For kernel / glibc / systemd / openssl advisories a reboot is required (or SLE Live Patching where licensed):

sudo zypper ps -s                      # services using deleted libs
sudo systemctl reboot                  # or: sudo shutdown -r now
# SUSE Live Patching (kgraft / klp) avoids reboot for kernel CVEs:
sudo zypper install -y kernel-livepatch-$(uname -r | tr - _)
klp -v patches                         # active livepatches

Solution – Alternative Approaches

If the primary patch is not viable, choose from these:

• Roll back via Snapper (Btrfs snapshots taken automatically before zypper transactions on SLES 15):

  sudo snapper list
  sudo snapper undochange <pre>..<post>  # diff between two snapshot numbers
  sudo snapper rollback <pre>            # boot the host into the chosen snapshot

• Lock the package so zypper cannot upgrade it:

  sudo zypper al ftdump                   # add lock
  zypper ll | grep ftdump                 # list locks
  sudo zypper rl ftdump                   # remove lock

• Install an older NVR if a regression is suspected:

  zypper se -s ftdump                     # show all available versions
  sudo zypper install --oldpackage ftdump-<older-NVR>

• Disable the AppArmor profile briefly to confirm policy is the cause, then re-enable:

  # reproduce, capture denials in the journal:
  sudo journalctl -k | grep apparmor | tail

• Where SLE Live Patching is licensed, apply kernel fixes without reboot:

  klp -v patches                         # active livepatches
  sudo zypper install -y kernel-livepatch-$(uname -r | tr - _)

Verification & Acceptance Criteria

All of these should pass after the fix:

rpm -q ftdump                                            # expected fixed NVR
sudo zypper patch-check                                  # 0 critical patches outstanding
sudo firewall-cmd --list-services
sudo aa-status | head -5
sudo zypper ps -s                                        # any services still using deleted libs

The conditions described in the advisory must no longer be reported for ftdump across two consecutive runs.

Rollback Plan

Capture state before any change:

rpm -qa > /root/rpm-pre.txt
sudo zypper history list > /root/zypper-history-pre.txt
# Snapper takes pre/post snapshots automatically on Btrfs root.
sudo snapper create -d 'pre-patch-ftdump'   # explicit named snapshot
sudo snapper list | head

To revert if the patch is bad:

# Preferred on Btrfs root — boot the prior snapshot:
sudo snapper rollback <snapshot-id>
sudo systemctl reboot
# Or downgrade just the package:
sudo zypper install --oldpackage ftdump-<older-NVR>
# Custom security policy cleanup:

Prevention & Hardening

Reduce the chance of this recurring on SLES 15:

• Enable automatic patch installation:

  sudo zypper install -y zypper-automatic
  sudo systemctl enable --now zypper-automatic.timer
  # Or use YaST: yast2 online_update_configuration

• Subscribe to sle-security-updates and watch suse.com/support/update.

• Mirror through SUSE Manager or RMT (Repository Mirroring Tool) for controlled rollouts:

  sudo zypper install -y rmt-server rmt-cli
  sudo rmt-cli sync
  sudo rmt-cli products enable SLES/15/x86_64

• Lock sensitive packages so they cannot be auto-upgraded:

  sudo zypper al ftdump

• Ensure Snapper is enabled on the root subvolume and pre/post hooks run for every zypper transaction:

  sudo snapper -c root get-config | head
  # Default zypper plugin: /usr/lib/zypp/plugins/commit/snapper.zypp-commit-plugin

• Monitor file integrity with AIDE:

  sudo zypper install -y aide
  sudo aide --init && sudo mv /var/lib/aide/aide.db.new /var/lib/aide/aide.db
  sudo aide --check

• Subscribe to SUSE Live Patching so kernel CVEs can be remediated without reboot:

  sudo SUSEConnect -p sle-module-live-patching/15.0/x86_64
  sudo zypper install -y kernel-livepatch-$(uname -r | tr - _)
  klp -v patches

• Keep AppArmor profiles in enforce; review /etc/apparmor.d/ after every package upgrade.

• Apply CIS SUSE Linux Enterprise Server Benchmark hardening.

Related Errors & Cross-Refs

Issues that commonly surface alongside a ftdump update: zypper lock contention, systemd unit ordering cycles, AppArmor denials, firewalld zone drift, and kernel taint flags. Useful triage:

sudo zypper ps -s
systemd-analyze critical-chain
sudo journalctl -k | grep apparmor | tail
sudo firewall-cmd --get-active-zones
cat /proc/sys/kernel/tainted

View all sles-15 tutorials on the Tutorials Hub →

Browse all common problems & solutions on the Tutorials Hub.

References & Further Reading

Primary reference: SUSE advisory ESSA-2025:2834 (see also SUSE bugzilla). Manual pages useful on SLES 15:

man zypper
man zypper.conf
man systemctl
man journalctl
man firewall-cmd
man snapper
man apparmor
man aa-status
man SUSEConnect
man klp

Other resources: SUSE Linux Enterprise Server 15 documentation, suse.com/security, SUSE security blog, and per-package notes in /usr/share/doc/packages/ftdump/ for components implicated in this advisory.