Ubuntu 14.04 — libvirt — multiple vulnerabilities (20 CVEs) — patch and remediation guide

📖 ~4 min read  •  Source: Ubuntu Security Notice USN-4047-2

Related CVEs: CVE-2019-10161 CVE-2018-12126 CVE-2018-12127 CVE-2018-12130 CVE-2019-11091 https://wiki.ubuntu.com/SecurityTeam/KnowledgeBase/MDS CVE-2018-1064 CVE-2018-3639  +12 more

Upstream summary: USN-4047-1 fixed a vulnerability in libvirt. This update provides
the corresponding update for Ubuntu 14.04 ESM.

Original advisory details:

Matthias Gerstner and Ján Tomko discovered that libvirt incorrectly handled
certain API calls. An attacker could possibly use this issue to check for
arbitrary files, or execute arbitrary binaries. In the default
installation, attackers would be isolated by the libvirt AppArmor profile.

Table of contents

1. Symptom & Impact
2. Environment & Reproduction
3. Root Cause Analysis
4. Quick Triage
5. Step-by-Step Diagnosis
6. Solution – Primary Fix
7. Solution – Alternative Approaches
8. Verification & Acceptance Criteria
9. Rollback Plan
10. Prevention & Hardening
11. Related Errors & Cross-Refs
12. References & Further Reading

Symptom & Impact

On Ubuntu 14.04 (trusty) hosts that have libvirt installed, administrators report behaviour consistent with Ubuntu Security Notice USN-4047-2: apt reports pending security updates, services backed by libvirt fail or restart unexpectedly, AppArmor denials appear in the kernel log, and — for security-rated advisories — the host is exposed to the vulnerability set above. Impact ranges from a single service-restart loop to wider availability incidents whenever libvirt sits on the serving path.

Environment & Reproduction

Reproduction targets Ubuntu 14.04 (trusty). Confirm release and installed package:

lsb_release -a
cat /etc/os-release
dpkg -l libvirt | tail -2
apt-cache policy libvirt
uname -r

Trigger the workflow that exposes libvirt — multiple vulnerabilities (20 CVEs) — patch and remediation guide while collecting:

sudo tail -200 /var/log/syslog | grep -i libvirt
sudo tail -200 /var/log/syslog
sudo tail -200 /var/log/apt/history.log
sudo tail -200 /var/log/kern.log | grep -i apparmor

Root Cause Analysis

Root cause is documented in Ubuntu Security Notice USN-4047-2. Canonical security maintainers shipped fixes in the corresponding libvirt update for Ubuntu 14.04; running an outdated build leaves the host exposed to the failure modes described in the advisory. On this release the fix typically arrives via the Ubuntu Pro ESM (esm-infra / esm-apps) channels rather than the standard archive. Correlate apt history with the journal:

grep -A2 -B2 libvirt /var/log/apt/history.log
zgrep -A2 -B2 libvirt /var/log/apt/history.log.*.gz 2>/dev/null
cat /proc/sys/kernel/tainted   # non-zero = tainted kernel / out-of-tree modules

Quick Triage

Run these on Ubuntu 14.04 to capture the current state of libvirt:

dpkg -l libvirt | tail -1                  # installed version
dpkg -V libvirt                             # verify shipped files
sudo apt update && apt list --upgradable 2>/dev/null | grep -i security
sudo service libvirt status
sudo ufw status verbose 2>/dev/null | head -20
sudo aa-status 2>/dev/null | head -20
# If libvirt ships a service unit (unit/job name often differs from pkg name, e.g.
# bind9→named, apache2→apache2, postgresql-NN→postgresql@NN-main):
initctl list 2>/dev/null | grep libvirt

On trusty the standard archive no longer ships security fixes. Verify Ubuntu Pro ESM coverage:

# `pro` CLI not available on this release; check the older `ubuntu-advantage-tools`:
sudo ua status --format=json 2>/dev/null | head
apt-cache policy | grep -i esm

Step-by-Step Diagnosis

1. List failing services.

   initctl list | grep -v running

2. Tail the journal / syslog for libvirt.

   sudo tail -f /var/log/upstart/libvirt.log
   sudo tail -f /var/log/syslog

3. Inspect UFW (Uncomplicated Firewall) state.

   sudo ufw status numbered
   sudo ufw show added
   sudo iptables -L -n -v | head -30

4. Surface AppArmor denials and switch the profile to complain mode if needed.

   sudo journalctl -k 2>/dev/null | grep -i 'apparmor="DENIED"' | tail -30
   sudo aa-status
   # /etc/apparmor.d/usr.bin.libvirt or usr.sbin.libvirt — inspect first
   sudo aa-complain /etc/apparmor.d/usr.bin.libvirt 2>/dev/null || true

5. Verify libvirt integrity and reinstall if anything is altered.

   sudo dpkg -V libvirt
   sudo debsums -c libvirt 2>/dev/null
   sudo apt install --reinstall -y libvirt

6. Correlate findings with /var/log/apt/history.log, /var/log/dpkg.log, and Ubuntu Security Notice USN-4047-2 to pin the change that introduced libvirt — multiple vulnerabilities (20 CVEs) — patch and remediation guide.

Solution – Primary Fix

Apply the corrective apt transaction referenced by Ubuntu Security Notice USN-4047-2, then reload the affected service:

sudo apt update
sudo apt -y install --only-upgrade libvirt
# upstart uses initctl, not systemctl:
# Service name may differ from pkg name; check first:
initctl list 2>/dev/null | grep libvirt
sudo service libvirt restart
dpkg -l libvirt | tail -1            # confirm new version
sudo service libvirt status

On trusty the standard archive is past EoL for security; enable Ubuntu Pro ESM to receive the fix:

# Older releases use the `ua` command:
sudo ua attach <token>
sudo ua enable esm-infra
sudo ua enable esm-apps
sudo apt update
sudo apt -y install --only-upgrade libvirt

For kernel / glibc / systemd / openssl advisories a reboot (or Livepatch) is required:

sudo apt install -y needrestart
sudo needrestart -r l       # list units that need restart
sudo systemctl reboot       # or: sudo shutdown -r now

Solution – Alternative Approaches

If the primary upgrade is not viable, pick from these:

• Hold the package so apt cannot upgrade it:

  sudo apt-mark hold libvirt
  apt-mark showhold | grep libvirt
  # Release the hold later with:
  sudo apt-mark unhold libvirt

• Pin a known-good version via apt preferences:

  # /etc/apt/preferences.d/libvirt.pref
  Package: libvirt
  Pin: version <good-version>
  Pin-Priority: 1001

• Downgrade to an older version if a regression is suspected:

  apt-cache madison libvirt
  sudo apt install --allow-downgrades -y libvirt=<older-version>

• Investigate AppArmor blocking the new binary; switch to complain briefly, capture denials, then re-enforce:

  sudo aa-complain /etc/apparmor.d/usr.bin.libvirt 2>/dev/null
  # reproduce the failure
  sudo journalctl -k | grep apparmor | tail
  sudo aa-enforce /etc/apparmor.d/usr.bin.libvirt 2>/dev/null

• Take only the security pocket update and defer the full point-release upgrade:

  sudo apt -y install --only-upgrade -t trusty-security libvirt

Verification & Acceptance Criteria

All of these should pass after the fix is applied:

dpkg -l libvirt | tail -1                                  # expected fixed version
apt list --upgradable 2>/dev/null | grep -i security || echo OK
sudo service libvirt status
sudo tail -50 /var/log/syslog | grep libvirt || echo OK
sudo ufw status numbered | head
sudo aa-status 2>/dev/null | head -5

The original reproduction for libvirt — multiple vulnerabilities (20 CVEs) — patch and remediation guide must not trigger across two consecutive runs.

Rollback Plan

Capture state before any change:

apt list --installed 2>/dev/null > /root/apt-pre.txt
dpkg --get-selections > /root/dpkg-pre.txt
# ZFS-on-root (Ubuntu 20.04+ default installer option):
sudo zfs snapshot rpool/ROOT/ubuntu@pre-libvirt
# LVM-on-root:
sudo lvcreate -L 4G -s -n root_pre_patch /dev/<vg>/<root-lv>

To revert:

sudo apt install --allow-downgrades -y libvirt=<old-version>
sudo service libvirt restart
sudo service libvirt restart
# Kernel rollback: pick the prior kernel from the GRUB menu, then:
sudo systemctl reboot
# ZFS rollback (rolls the whole root dataset):
sudo zfs rollback -r rpool/ROOT/ubuntu@pre-libvirt

Prevention & Hardening

Reduce the chance of this recurring on Ubuntu 14.04 (trusty):

• Enable scheduled security updates via unattended-upgrades:

  sudo apt install -y unattended-upgrades update-notifier-common
  sudo dpkg-reconfigure -plow unattended-upgrades
  # /etc/apt/apt.conf.d/50unattended-upgrades:
  Unattended-Upgrade::Allowed-Origins { "${distro_id}:${distro_codename}-security"; };

• Install needrestart so services restart automatically after library upgrades:

  sudo apt install -y needrestart
  # /etc/needrestart/needrestart.conf -> $nrconf{restart} = 'a';

• Attach Ubuntu Pro for ESM (mandatory on this past-EoL release) and Livepatch where supported:

  sudo ua attach <token>
  sudo ua enable esm-infra
  sudo ua enable esm-apps

• Subscribe to ubuntu-security-announce and watch ubuntu.com/security/cves.

• Monitor file integrity with debsums and AIDE:

  sudo apt install -y debsums aide
  sudo debsums -ca
  sudo aideinit && sudo mv /var/lib/aide/aide.db.new /var/lib/aide/aide.db
  sudo aide --check

• For estate-wide patching, manage with Canonical Landscape:

  sudo apt install -y landscape-client
  sudo landscape-config

• Keep AppArmor profiles in enforce mode and apply CIS Ubuntu Linux Benchmark hardening.

Related Errors & Cross-Refs

Issues that commonly surface alongside libvirt — multiple vulnerabilities (20 CVEs) — patch and remediation guide: apt lock contention, broken dpkg state, systemd ordering cycles, AppArmor denials, and UFW rule drift. Useful triage:

sudo dpkg --configure -a
sudo apt --fix-broken install
initctl list | head
sudo journalctl -k 2>/dev/null | grep -i apparmor | tail
cat /proc/sys/kernel/tainted

View all ubuntu-14-04 tutorials on the Tutorials Hub →

Browse all common problems & solutions on the Tutorials Hub.

References & Further Reading

Primary reference: Ubuntu Security Notice USN-4047-2. Manual pages useful on Ubuntu 14.04:

man apt
man apt-get
man apt-mark
man dpkg
man initctl
# journald not present on this release
man ufw
man apparmor
man aa-status
man unattended-upgrades
man ua

Other resources: Ubuntu Security Notices, Ubuntu CVE Tracker, Ubuntu upgrade notes, and per-package notes in /usr/share/doc/libvirt/ for components implicated in libvirt — multiple vulnerabilities (20 CVEs) — patch and remediation guide.