openSUSE Leap 15.5 — uuidd — vulnerability — patch and remediation guide

📖 ~4 min read  •  Source: SUSE advisory openSUSE-SU-2024:14523-1 (see also SUSE bugzilla)

Related CVEs: CVE-2024-28085

Upstream summary: wall in util-linux through 2.40, often installed with setgid tty permissions, allows escape sequences to be sent to other users' terminals through argv. (Specifically, escape sequences received from stdin are blocked, but escape sequences received from argv are not blocked.) There may be plausible scenarios where this leads to account takeover.

Table of contents

1. Symptom & Impact
2. Environment & Reproduction
3. Root Cause Analysis
4. Quick Triage
5. Step-by-Step Diagnosis
6. Solution – Primary Fix
7. Solution – Alternative Approaches
8. Verification & Acceptance Criteria
9. Rollback Plan
10. Prevention & Hardening
11. Related Errors & Cross-Refs
12. References & Further Reading

Symptom & Impact

On openSUSE Leap 15.5 hosts that have uuidd installed, administrators report behaviour consistent with SUSE advisory openSUSE-SU-2024:14523-1: zypper patch-check lists open patches, services backed by uuidd fail or restart unexpectedly, AppArmor profile warnings appear in journalctl -k — and for security-rated advisories the host is exposed to the vulnerability set above. Impact ranges from a single service-restart loop to wider availability incidents whenever uuidd sits on the serving path.

Environment & Reproduction

Reproduction targets openSUSE Leap 15.5. Confirm release and installed package:

cat /etc/os-release
rpm -q uuidd
zypper info uuidd | head -20
zypper lr -E                              # enabled repositories
SUSEConnect --status-text 2>/dev/null || echo 'SCC not connected (optional on openSUSE Leap)'

Trigger the workflow that exposes uuidd — vulnerability — patch and remediation guide while collecting:

sudo journalctl -u uuidd -b --no-pager | tail -200
sudo journalctl -xe --no-pager | tail -200
sudo tail -200 /var/log/zypp/history
sudo journalctl -k | grep -i apparmor | tail -100
# Bundle evidence for SUSE / community support:
sudo supportconfig -R /var/tmp -B uuidd

Root Cause Analysis

Root cause is documented in SUSE advisory openSUSE-SU-2024:14523-1. openSUSE security maintainers shipped fixes in the corresponding uuidd update for openSUSE Leap 15.5; running an outdated build leaves the host exposed to the failure modes described in the advisory. Correlate zypper history with system logs:

sudo zypper history | grep uuidd
sudo zypper history --since='-7 days' | tail -40
sudo journalctl -k | grep -i apparmor | tail -100
cat /proc/sys/kernel/tainted   # non-zero = tainted kernel / out-of-tree modules

Quick Triage

Run these on openSUSE Leap 15.5 to capture the current state of uuidd:

rpm -q uuidd                              # installed NVR
rpm -V uuidd                              # verify shipped files
sudo zypper patch-check                    # open patches
sudo zypper lp 2>/dev/null | head
systemctl --failed --no-pager
sudo firewall-cmd --list-all
sudo aa-status                             # AppArmor profiles
# If uuidd ships a systemd unit (unit name may differ from pkg name, e.g.
# bind→named, postgresql-server→postgresql, php-fpm→php-fpm):
systemctl list-unit-files | grep -i uuidd | head

Step-by-Step Diagnosis

1. List failed systemd units.

   systemctl --failed --no-pager

2. Tail the journal for uuidd and the system bus.

   sudo journalctl -u uuidd -f --no-pager
   sudo journalctl -xe -f --no-pager

3. Inspect firewall posture (firewalld is the default on openSUSE).

   sudo firewall-cmd --list-all-zones --permanent
   sudo nft list ruleset 2>/dev/null | head -50

4. Surface AppArmor denials and switch the profile to complain mode if needed.

   sudo journalctl -k | grep -i 'apparmor="DENIED"' | tail -30
   sudo aa-status
   sudo aa-complain /etc/apparmor.d/usr.sbin.uuidd 2>/dev/null || true

5. Verify uuidd integrity and reinstall if anything is altered.

   sudo rpm -V uuidd
   sudo zypper verify
   sudo zypper install --force uuidd

6. Inspect Snapper snapshots to know exactly which transaction introduced the regression.

   sudo snapper list | tail -20
   sudo snapper status <pre-id>..<post-id>

7. Correlate findings with /var/log/zypp/history, zypper history, and SUSE advisory openSUSE-SU-2024:14523-1 to pin the change that introduced uuidd — vulnerability — patch and remediation guide.

Solution – Primary Fix

Apply the corrective zypper transaction referenced by SUSE advisory openSUSE-SU-2024:14523-1, then reload affected systemd units:

sudo zypper ref                        # refresh repos
sudo zypper -n patch                   # apply ALL open patches (recommended)
# Or target a single package:
sudo zypper -n update uuidd
sudo systemctl daemon-reload
# Unit name may differ from pkg name; check first:
systemctl list-unit-files | grep -i uuidd | head
sudo systemctl restart uuidd
rpm -q uuidd                           # confirm new NVR
systemctl is-active uuidd 2>/dev/null  # confirm running (if a unit exists)

For kernel / glibc / systemd / openssl advisories a reboot is required. Snapper takes pre/post snapshots on Btrfs root automatically, giving a safety net:

sudo zypper ps -s                      # services using deleted libs
sudo snapper list | tail -5            # pre/post snapshots around the patch
sudo systemctl reboot                  # or: sudo shutdown -r now

Solution – Alternative Approaches

If the primary fix is not viable, choose from these:

• Roll back via Snapper (Btrfs snapshots are taken automatically before zypper transactions on openSUSE Leap 15.5). This is the primary safety net for openSUSE administrators:

  sudo snapper list
  sudo snapper status <pre-id>..<post-id>   # diff between two snapshot numbers
  sudo snapper undochange <pre-id>..<post-id>
  sudo snapper rollback <pre-id>            # boot the host into the chosen snapshot
  sudo systemctl reboot

• Lock the package so zypper cannot upgrade it:

  sudo zypper al uuidd                   # add lock
  zypper ll | grep uuidd                 # list locks
  sudo zypper rl uuidd                   # remove lock

• Install an older NVR if a regression is suspected:

  zypper se -s uuidd                     # show all available versions
  sudo zypper install --oldpackage uuidd-<older-NVR>

• Disable the AppArmor profile briefly to confirm policy is the cause, then re-enable:

  sudo aa-disable /etc/apparmor.d/usr.sbin.uuidd
  # reproduce, capture denials in the journal:
  sudo journalctl -k | grep apparmor | tail
  sudo aa-enforce /etc/apparmor.d/usr.sbin.uuidd

• openSUSE Leap follows the SUSE Linux Enterprise patch stream. Sync against the official update repository if a mirror has drifted:

  sudo zypper mr -e repo-update          # ensure update repo is enabled
  sudo zypper ref repo-update
  sudo zypper -n patch

Verification & Acceptance Criteria

All of these should pass after the fix:

rpm -q uuidd                                            # expected fixed NVR
sudo zypper patch-check                                  # 0 critical patches outstanding
systemctl is-active uuidd 2>/dev/null
sudo journalctl -u uuidd --since "5 minutes ago" --no-pager | grep -iE "error|fail" || echo OK
sudo firewall-cmd --list-services
sudo aa-status | head -5
sudo zypper ps -s                                        # any services still using deleted libs

The original reproduction for uuidd — vulnerability — patch and remediation guide must not trigger across two consecutive runs.

Rollback Plan

Capture state before any change. On openSUSE, Snapper is the canonical rollback path:

rpm -qa > /root/rpm-pre.txt
sudo zypper history list > /root/zypper-history-pre.txt
# Snapper takes pre/post snapshots automatically on Btrfs root.
sudo snapper create -d 'pre-patch-uuidd'   # explicit named snapshot
sudo snapper list | head

To revert if the patch / roll is bad:

# Preferred on Btrfs root — boot the prior snapshot:
sudo snapper list
sudo snapper rollback <pre-id>
sudo systemctl reboot
# Or downgrade just the package:
sudo zypper install --oldpackage uuidd-<older-NVR>
sudo systemctl daemon-reload
sudo systemctl restart uuidd
# Custom AppArmor profile cleanup:
sudo apparmor_parser -R /etc/apparmor.d/usr.sbin.uuidd

Prevention & Hardening

Reduce the chance of this recurring on openSUSE Leap 15.5:

• Enable automatic patch installation:

  sudo zypper install -y zypper-automatic
  sudo systemctl enable --now zypper-automatic.timer
  # Or use YaST: yast2 online_update_configuration

• Subscribe to opensuse-security-announce and watch suse.com/support/update.

• Lock sensitive packages so they cannot be auto-upgraded:

  sudo zypper al uuidd

• Ensure Snapper is enabled on the root subvolume and pre/post hooks run for every zypper transaction. This is the cornerstone of safe openSUSE patching:

  sudo snapper -c root get-config | head
  # Default zypper plugin: /usr/lib/zypp/plugins/commit/snapper.zypp-commit-plugin
  sudo snapper list | tail -10

• Monitor file integrity with AIDE:

  sudo zypper install -y aide
  sudo aide --init && sudo mv /var/lib/aide/aide.db.new /var/lib/aide/aide.db
  sudo aide --check

• Keep AppArmor profiles in enforce; review /etc/apparmor.d/ after every package upgrade.

• Apply CIS / openSUSE hardening guidance and use salt or ansible to enforce baseline state across the fleet.

Related Errors & Cross-Refs

Issues that commonly surface alongside uuidd — vulnerability — patch and remediation guide: zypper lock contention, systemd unit ordering cycles, AppArmor denials, firewalld zone drift, and kernel taint flags. Useful triage:

sudo zypper ps -s
systemd-analyze critical-chain
sudo journalctl -k | grep apparmor | tail
sudo firewall-cmd --get-active-zones
cat /proc/sys/kernel/tainted
sudo snapper list | tail

View all opensuse-leap-15-5 tutorials on the Tutorials Hub →

Browse all common problems & solutions on the Tutorials Hub.

References & Further Reading

Primary reference: SUSE advisory openSUSE-SU-2024:14523-1 (see also SUSE bugzilla). Manual pages useful on openSUSE Leap 15.5:

man zypper
man zypper.conf
man systemctl
man journalctl
man firewall-cmd
man snapper
man apparmor
man aa-status

Other resources: openSUSE documentation, suse.com/security, openSUSE security portal, and per-package notes in /usr/share/doc/packages/uuidd/ for components implicated in uuidd — vulnerability — patch and remediation guide.

View all openSUSE Leap 15.5 tutorials on the Tutorials Hub →